If you were Registered and logged in, you could reply and use other advanced thread options
Posted by Jim on July 19, 2005, 9:08 pm
HELP!! I need a professional opinion on how to layout the tiles in a
whirlpool/shower alcove. I installed a 32" wide whirlpool in an alcove
that's exactly 32-1/2" deep. When the 32"x60" tub is in place there's 1/2"
of wall between the edge of the tub and the edge (corner) of the alcove
wall.
I will be installing a glass sliding shower door on top of the outside rim
of the whirlpool tub with the metal ends screwed to the wall.
How do I tile this?
1. Do I place the tiles starting inline exactly with the outside edge of the
tub with a 1/2" of bare wall showing? Then mount the shower door on top of
the tub rim and screwed through the tile to the wall in the alcove?
2. Do I place the tiles starting at the very edge of alcove wall with 1/2"
slivers of tiles below the rim of the tub? I would have whole tiles above
the rim of the tub and 1/2" sliver tiles below the rim between the edge of
the tub and alcove corner. Then mount the shower door on top of the tub rim
and screwed through the tile to the wall in the alcove?
3. Should the shower door mount directly on the bare wall with the tiles cut
around the metal ends of the shower door that mount to the wall?
Posted by G Henslee on July 20, 2005, 7:13 am
Jim wrote:
> HELP!! I need a professional opinion on how to layout the tiles in a
> whirlpool/shower alcove. I installed a 32" wide whirlpool in an alcove
<snip>
Throw some good pics up on a web site that depict what you're attempting
to describe and I'll help you.
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap