|
Posted by aemeijers on May 31, 2008, 4:15 pm
millinghill@yahoo.com wrote:
>> Not unless the cabinets you are using have frames with solid wood in a
>> suitable location to put a vertical screw, and your bulkhead is framed
>> with suitable blocking to screw into. Into the wall really works a lot
>> better- screws are a lot stronger at right angles to the pulling force,
>> gravity in this case. Don't try screwing through the thin top of the
>> case- the screws will pull through.
>>
>> If you want easy-off cabinets, hang them European style, on cleats. Undo
>> one or two screws in bottom edge, and just lift them off the cleat.
>> Metal hanging rails are available, or you can just rip a hardwood 1x4
>> down the center at a 45 angle, and make your own. (In Europe, it is
>> common to take the cabinets and light fixtures and such when you move-
>> they are considered part of the furniture over there.)
>>
>> --
>> aem sends....
>
> Pulling through is my concern too. Can you explain the cleats more?
> Do you have a link or example you can suggest I look at?
I did forget to say 'french' cleat, didn't I?
Google is your friend:
<http://www.google.com/search?hl=en&q=%27french+cleat%27+diagram&btnG=Google+Search>
brings up about 53,000 links.
Short version- a rail screwed to wall, that has an upper lip that sticks
out. A rail, screwed to cabinet, that has a lower lip that sticks out.
You hook the rail on the cabinet onto the rail on the wall, and gravity
does the work. Depending on the cabinet design, you may need spacer
blocks at the bottom, and trim or a decorative end panel to hide the <
3/4 " gap behind the cabinet. If kids are in the house (or you live in
earthquake country), a couple safety screws through the bottom rail of
the cabinet, into the wall or spacer blocks, is cheap insurance. A full
cabinet falling on you unexpectedly can mess up your whole day.
--
aem sends...
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap