Home Page link

Hanging sheetrock - horizontal or vertical

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 4       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Hanging sheetrock - horizontal or vertical 46erjoe 06-20-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by 46erjoe on June 20, 2006, 9:27 am
I've just finished framing out my basement to double our living
space. It's new construction with just a large poured rectangular
concrete floor between cinder block foundation walls.

The walls turn out to be just shy of 8' from floor to ceiling. I plan
to put in a suspended ceiling later so as to be able to get to all the
wiring/plumbing if necessary in the future.

My question is: Should I hang the sheet rock vertically or
horizontally? I've been careful to make sure that all the studs are
exactly 16" on center. I've heard that horizontally produces fewer
joints, but that also produces those nasty hard to hide 4' butt
joints. If I hung vertically, every joint would be flush.

Many of the walls are longer than 12', and since it's just me doing
the work, I don't think I have the strength to handle sheets that big.

I'm planning on doing the hanging and then bringing in a pro to do the
mudwork.

Related question: Should I hang the sheetrock a smidge - maybe a
half-inch off the (concrete) floor, just in case of water leakage?

Would horizontally hung sheetrock make for a stronger wall?

Any other tips?

Posted by badgolferman on June 20, 2006, 9:49 am
46erjoe, 6/20/2006, 9:27:09 AM,

> Related question: Should I hang the sheetrock a smidge - maybe a
> half-inch off the (concrete) floor, just in case of water leakage?

This is one reason to hang the sheetrock horizontally. When I went to
Mississippi to help with Katrina rebuilding I was taught to hang it
that way in case there is more flooding. That way only the bottom
wallboard must be replaced.

If you put up chair railing at the four foot seam you can easily hide
that joint also.

Posted by No on June 20, 2006, 9:57 am
46erjoe wrote:
> I've just finished framing out my basement to double our living
> space. It's new construction with just a large poured rectangular
> concrete floor between cinder block foundation walls.
>
> The walls turn out to be just shy of 8' from floor to ceiling. I plan
> to put in a suspended ceiling later so as to be able to get to all the
> wiring/plumbing if necessary in the future.
>
> My question is: Should I hang the sheet rock vertically or
> horizontally? I've been careful to make sure that all the studs are
> exactly 16" on center. I've heard that horizontally produces fewer
> joints, but that also produces those nasty hard to hide 4' butt
> joints. If I hung vertically, every joint would be flush.
>
> Many of the walls are longer than 12', and since it's just me doing
> the work, I don't think I have the strength to handle sheets that big.
>
> I'm planning on doing the hanging and then bringing in a pro to do the
> mudwork.
>
> Related question: Should I hang the sheetrock a smidge - maybe a
> half-inch off the (concrete) floor, just in case of water leakage?
>
> Would horizontally hung sheetrock make for a stronger wall?
>
> Any other tips?
I like horizontal with as long of sheets as possible. That gives you
fewest seams. As for the but seams your finish guy will have no issues
with that. yes, i would leave a little space at the floor.

I woudl also consider drywalling the ceiling! Here are my reasons.

1) Its cheaper than suspended.
2) It looks a lot nicer
3) it gives you more head room

My counter to the usual reasons someone want to do suspended

Gain access to plumbing and electrical
- The reality for most is they will never need to gain access or if they
do, its only occasionally. Of course in a drywalled ceiling you will put
access panels for your shut-off valves, hvac dampers and such. If you
need access somewhere else you cut a hole and then patch it. You are
still ahead of the cost game in a significant way.

Faster to install
Sort of - Yea, you can be finished in a day where Sheetrock takes time
between coats of mud. A good drywall crew can finish a ceiling in total
hours less time than can a suspended ceiling crew.

What if I need to run wires?
How often do you run wires? Run any before you finish the ceiling. What
would you do elsewhere in your house if you needed to run wires? Put in
conduits if you need to.

good luck

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php

Posted by 46erjoe on June 20, 2006, 11:30 am

>46erjoe wrote:
>> I've just finished framing out my basement to double our living
>> space. It's new construction with just a large poured rectangular
>> concrete floor between cinder block foundation walls.
>>
>> The walls turn out to be just shy of 8' from floor to ceiling. I plan
>> to put in a suspended ceiling later so as to be able to get to all the
>> wiring/plumbing if necessary in the future.
>>
>> My question is: Should I hang the sheet rock vertically or
>> horizontally? I've been careful to make sure that all the studs are
>> exactly 16" on center. I've heard that horizontally produces fewer
>> joints, but that also produces those nasty hard to hide 4' butt
>> joints. If I hung vertically, every joint would be flush.
>>
>> Many of the walls are longer than 12', and since it's just me doing
>> the work, I don't think I have the strength to handle sheets that big.
>>
>> I'm planning on doing the hanging and then bringing in a pro to do the
>> mudwork.
>>
>> Related question: Should I hang the sheetrock a smidge - maybe a
>> half-inch off the (concrete) floor, just in case of water leakage?
>>
>> Would horizontally hung sheetrock make for a stronger wall?
>>
>> Any other tips?
>I like horizontal with as long of sheets as possible. That gives you
>fewest seams. As for the but seams your finish guy will have no issues
>with that. yes, i would leave a little space at the floor.
>
>I woudl also consider drywalling the ceiling! Here are my reasons.
>
>1) Its cheaper than suspended.
>2) It looks a lot nicer
>3) it gives you more head room
>
>My counter to the usual reasons someone want to do suspended
>
>Gain access to plumbing and electrical
>- The reality for most is they will never need to gain access or if they
>do, its only occasionally. Of course in a drywalled ceiling you will put
>access panels for your shut-off valves, hvac dampers and such. If you
>need access somewhere else you cut a hole and then patch it. You are
>still ahead of the cost game in a significant way.
>
>Faster to install
>Sort of - Yea, you can be finished in a day where Sheetrock takes time
>between coats of mud. A good drywall crew can finish a ceiling in total
>hours less time than can a suspended ceiling crew.
>
>What if I need to run wires?
>How often do you run wires? Run any before you finish the ceiling. What
>would you do elsewhere in your house if you needed to run wires? Put in
>conduits if you need to.
>
>good luck
>
>Inviato da X-Privat.Org - Registrazione gratuita
http://www.x-privat.org/join.php


I plan on installing the suspended ceiling myself. I've done it before
in another home and it looked good. I have to do it anyway because the
builder did not hide the plumbing inside the first floor
floor-trusses. He just hung them on the bottoms. (Duh!). The wiring
though is routed within the truss criss-crosses. So I would have to
layer down the joists with 2 x 4s to create a flat surface for ceiling
sheetrock which would take away from the height. So I figure I
wouldn't be losing a whole lot by going with suspended ceiling.
Besides, I really suck at cutting holes in sheetrock for ceiling
fixtures. Inevitably they're a few inches off.

Posted by RayV on June 20, 2006, 10:27 am

46erjoe wrote:
>
> I'm planning on doing the hanging (sheetrock) and then bringing in a pro to do
the
> mudwork.
>
Check with your pro first. Drywall finishers sometimes charge more to
do only mudwork than they would if they hung the sheets and did the
mudwork. Reason being that they will probably have more mudwork to do
than if they hung it.

Finishing drywall is not that difficult if you are not in a rush. Use
lots of thin coats and a broad knife. Check through this informative
site.

http://www.drywallschool.com/


Page 1 of 4       1 2 3 > last >>
Similar ThreadsPosted
Vertical vs. Horizontal Blinds May 18, 2006, 10:46 am
Vertical Blinds or Drapes? July 25, 2005, 3:03 am
Best fitting for jog in vertical DWV pipe March 11, 2006, 3:31 pm
Vertical EMT Coupling and Support. June 19, 2006, 8:56 am
Cutting down vertical blinds..... July 5, 2006, 2:39 pm
Vertical Ceiling Tiles January 24, 2007, 7:43 pm
vertical blinds connector ? July 15, 2008, 12:10 am
Horizontal siding August 29, 2007, 12:34 am
vertical blinds wont turn HELP! July 21, 2005, 8:59 am
Vertical electrical wiring question. June 9, 2006, 1:26 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap