Home Page link

Harbor Freight 10" SCMS?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Harbor Freight 10" SCMS? Toller 05-24-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Toller on May 24, 2006, 8:29 pm
American Woodworker said that their 12" was a remarkable value at $200;
might not be as solid as a $600 saw, but fine for casual use.

Their 10" is now $90. I don't expect to use it much as I use a RAS for all
my 90 degree stuff, but the RAS is a pain to set up for off angles. I
rarely do any, but it would be nice to have a $90 SCMS for them. But, if it
is worthless then it is just burning $90.

Anyone actually used it?



Posted by Jim McLaughlin on May 24, 2006, 11:38 pm
Iknow I'm going to kick myself when I get the answer, but what is an "SCMS"?

--
Jim McLaughlin

Reply address is deliberately munged.
If you really need to reply directly, try:
jimdotmclaughlinatcomcastdotcom

And you know it is a dotnet not a dotcom
address.
> American Woodworker said that their 12" was a remarkable value at $200;
> might not be as solid as a $600 saw, but fine for casual use.
>
> Their 10" is now $90. I don't expect to use it much as I use a RAS for
all
> my 90 degree stuff, but the RAS is a pain to set up for off angles. I
> rarely do any, but it would be nice to have a $90 SCMS for them. But, if
it
> is worthless then it is just burning $90.
>
> Anyone actually used it?
>
>



Posted by njmodi on May 25, 2006, 12:56 am
sliding-compound-miter-saw


Posted by Jim McLaughlin on May 25, 2006, 4:05 am
Duuuuh.

--
Jim McLaughlin

Reply address is deliberately munged.
If you really need to reply directly, try:
jimdotmclaughlinatcomcastdotcom

And you know it is a dotnet not a dotcom
address.
> sliding-compound-miter-saw
>



Posted by nanook on May 25, 2006, 3:20 am
On Wed, 24 May 2006 20:38:43 -0700, "Jim McLaughlin" <jim.mclaughlin>
wrote:

>Iknow I'm going to kick myself when I get the answer, but what is an "SCMS"?


Sliding Compound Miter Saw

Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Harbor Freight May 23, 2006, 9:32 pm
Harbor Freight DMM June 3, 2006, 6:27 pm
Harbor Freight Pump?? May 17, 2006, 11:04 pm
Miter Saw from harbor freight ? March 28, 2008, 7:30 pm
Harbor Freight $99 compressor Problems September 13, 2005, 9:49 pm
plastic welding kit from Harbor Freight? January 30, 2007, 7:11 pm
Harbor Freight sells GARBAGE July 31, 2007, 11:31 pm
Anyone have experience w/Harbor Freight sandblasters? May 15, 2008, 7:28 pm
harbor freight roofing nailer:review September 22, 2006, 3:29 pm
harbor freight air compressor spare parts December 21, 2006, 11:35 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap