Home Page link

Hardie Board Siding questions...

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Hardie Board Siding questions... btdawgh 01-29-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on January 29, 2008, 11:16 pm
I am replacing the siding on my house with planked Hardie....when they
take off the old siding what should they do BEFORE putting up new
Hardie.....house is almost twenty years old....should they remove any
installation and or paper such as tyback or what and what should they
put in between the studs before the new Hardie goes
up..........someone said...foam board.....then was told NO because I
am in Houston,TX area....HELP...

Also, other questions..
...can the man made marble look alike around the sides of my tub be
cut...........could I remove the man made marble and have "tile" put
up the sides of the tub up from the floor to the bottom ledge of the
tub....this is not fiberglass ...it may be called cultured
marble.......could a hole be cut in the vanity of the same material
and then a sink put in............
.....can the backsplash be replaced in the kitchen without
compromising the countertop with is laminate....
...what is the best way to block heat from coming in an old brick
house...........is there anyway to "shoot" stuff between the studs to
decrease heat coming in..........
....

PexSupply Full Banner
Posted by Simpson on January 30, 2008, 8:07 pm
btdawgh@gmail.com wrote:
> I am replacing the siding on my house with planked Hardie....when they
> take off the old siding what should they do BEFORE putting up new
> Hardie.....house is almost twenty years old....should they remove any
> installation and or paper such as tyback or what and what should they
> put in between the studs before the new Hardie goes
> up..........someone said...foam board.....then was told NO because I
> am in Houston,TX area....HELP...
>
> Also, other questions..
> ...can the man made marble look alike around the sides of my tub be
> cut...........could I remove the man made marble and have "tile" put
> up the sides of the tub up from the floor to the bottom ledge of the
> tub....this is not fiberglass ...it may be called cultured
> marble.......could a hole be cut in the vanity of the same material
> and then a sink put in............
> .....can the backsplash be replaced in the kitchen without
> compromising the countertop with is laminate....
> ...what is the best way to block heat from coming in an old brick
> house...........is there anyway to "shoot" stuff between the studs to
> decrease heat coming in..........
> ....


I'm surprised on one answered your question.

umm... what was the question again?

Similar ThreadsPosted
hardie-board siding -cutting, and other lessons learned March 23, 2006, 2:38 pm
Fiber Cement Siding (hardie) Questions February 9, 2006, 3:43 pm
Screwing Hardie Board May 13, 2008, 8:19 pm
Hardie board - painting, nails, caulk April 19, 2006, 10:06 pm
james hardie siding October 20, 2006, 10:02 am
Best caulk for hardie siding? March 16, 2008, 6:06 am
James Hardie Fiber/Cement Siding: Opinion On ? August 5, 2006, 8:16 am
Hardie Cement Pre-Painted House Siding: How Are Nail Heads Handled ? August 5, 2006, 5:27 pm
What is "Smart Board" siding ?? October 24, 2005, 5:48 pm
Outdoor Board For Siding Edge Bottom: What Type Of Wood To Use ? July 9, 2005, 9:48 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap