Heat recovery from molten slag

	Heat recovery from molten slag

Home Repair - - If it ain't broken, don't fix it. Otherwise look here.

Bookmark this page: YahooMyWeb

Subject

Author

Date

govind

06-07-2008

dpb

govind

dpb

dpb

HeyBub

If you were Registered and logged in, you could reply and use other advanced thread options

Posted by HeyBub on June 7, 2008, 12:50 pm

govind wrote:

> Is there any techology available to recover the waste heat from the

> molten slag comes out from

> copper smelter or iron smelter?

I saw a show about a cat that lived at a small foundry. She napped on a
wooden beam above the slag pit, soaking up the warmth.

Does that count?

Similar Threads	Posted
Heat Recovery Ventilator	October 11, 2006, 9:14 am
Shower wastewater heat recovery	October 25, 2005, 6:55 pm
Need opinions about what to do about slag after pouring concrete	June 12, 2006, 6:26 pm
Furnace Stops prematurely while in recovery mode	January 31, 2007, 9:13 pm
High efficiency, high recovery water heaters	July 24, 2008, 2:43 pm
Whirlpool electric dryer; problem with heat/thermal cut-offs (no heat)	August 31, 2007, 12:58 pm
Buddy tells me if I have elec heat and a heat pump, I can get a deal with PSE&G...	September 24, 2005, 8:42 pm
HVAC - Oil or electric backup for new heat pump? Or oil heat only?	August 17, 2005, 8:16 pm
Covering a heat pipe to prevent heat from coming out?	February 28, 2007, 2:10 am
Infrared heat (radiant heat) for paint removal?	May 4, 2007, 2:21 pm