|
Posted by Pete on September 6, 2006, 6:04 pm
Where is it switched? Sounds like there might be a short somewhere in the
supply line/switch/subpanel. If it is switched near the pump, try replacing
the switch (after isolating it at the panel) preferably with a double-pole
switch, assuming 230v. If the wiring is old/perished, that could be suspect
too, especially if it is not armored or uv resistant.
Pete
--
---
> Hope someone can help me with a real head-scratcher. I've had a
> swimming pool with a 1/12 horsepower motor for 15+ years. I've replaced
> motor a few times without incident. Earlier this year, I turned it off
> to clean and it wouldn't turn back on. Replaced motor twice; same
> problem. Some times it starts, some time it doesn't. Even when it
> doesn't start, basic electric meter shows current reaching the motor.
> I'm stumped. Any ideas?
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap