Home Page link

Hole in Ducting.

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Hole in Ducting. PVR 06-21-2005
|--> Re: Hole in Ducting. deans@wdeans.co...06-21-2005
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by PVR on June 21, 2005, 10:03 pm
I need to cut a 4" dia hole in a 6" dia duct which is installed in place
between the joists. I am considering a circular saw with a pilot drill
attached to a power drill. Perhaps there are better techniques or tools?

Thanks, Peter.



Posted by deans@wdeans.com on June 21, 2005, 10:24 pm
Greetings,

What you suggest would work but you might just consider using a pair of
snips. Consider if your pre-existing hole saw blade is for metal or
wood in your decision making.

William


Posted by Joseph Meehan on June 22, 2005, 7:05 am
PVR wrote:
>I need to cut a 4" dia hole in a 6" dia duct which is installed in
> place between the joists. I am considering a circular saw with a
> pilot drill attached to a power drill. Perhaps there are better
> techniques or tools?
> Thanks, Peter.

The best tool is a nibbler. Snips are second. I sure would not try to
use a circular saw.

--
Joseph Meehan

Dia duit



Similar ThreadsPosted
Drywall and ducting March 27, 2007, 11:36 pm
Ducting question January 17, 2008, 3:52 pm
Replace Ducting w New HVAC ? January 24, 2007, 4:34 pm
duct tape is drying out on ducting November 6, 2005, 7:58 pm
Fiberglass Ducting and Air Conditioning; need to remove? July 19, 2006, 1:56 am
Will single hole faucet fit widespread center hole? March 14, 2007, 2:10 am
Room air conditioner + ducting: a good idea? October 1, 2005, 2:49 pm
range hood ducting with thermal break May 15, 2006, 7:02 am
Connecting Swamp Cooler to heating ducting July 19, 2006, 11:00 am
Flexible aluminum or insulated ducting for bathroom fans? August 20, 2006, 2:00 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap