Home Page link

How Do I Rehang Patio Screen on Its Track?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 5       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
How Do I Rehang Patio Screen on Its Track? jim evans 05-02-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by jim evans on May 2, 2008, 10:09 pm
I had to replace the wheels on the bottom of the screen door
associated with my patio door. But, I can't figure out how to rehang
the screen door. The upper rollers ride in a channel/track the
opening to which is smaller then the rollers.

Here are pictures:

http://img205.imageshack.us/img205/7378/combop1030200re9.jpg
http://img210.imageshack.us/img210/3710/rollerp1030203bw3.jpg
http://img170.imageshack.us/img170/9117/closupp1030197gz6.jpg

This is a sketch of the cross section of the channel/track:
http://img404.imageshack.us/img404/5738/graphic1xh1.gif

Posted by HeyBub on May 2, 2008, 10:16 pm
jim evans wrote:
> I had to replace the wheels on the bottom of the screen door
> associated with my patio door. But, I can't figure out how to rehang
> the screen door. The upper rollers ride in a channel/track the
> opening to which is smaller then the rollers.
>
> Here are pictures:
>
> http://img205.imageshack.us/img205/7378/combop1030200re9.jpg
> http://img210.imageshack.us/img210/3710/rollerp1030203bw3.jpg
> http://img170.imageshack.us/img170/9117/closupp1030197gz6.jpg
>
> This is a sketch of the cross section of the channel/track:
> http://img404.imageshack.us/img404/5738/graphic1xh1.gif

Turn the screen around and hook the rollers in the track?



Posted by Oren on May 2, 2008, 10:48 pm
wrote:

>jim evans wrote:
>> I had to replace the wheels on the bottom of the screen door
>> associated with my patio door. But, I can't figure out how to rehang
>> the screen door. The upper rollers ride in a channel/track the
>> opening to which is smaller then the rollers.
>>
>> Here are pictures:
>>
>> http://img205.imageshack.us/img205/7378/combop1030200re9.jpg
>> http://img210.imageshack.us/img210/3710/rollerp1030203bw3.jpg
>> http://img170.imageshack.us/img170/9117/closupp1030197gz6.jpg
>>
>> This is a sketch of the cross section of the channel/track:
>> http://img404.imageshack.us/img404/5738/graphic1xh1.gif
>
>Turn the screen around and hook the rollers in the track?
>

Good one. The photo did seem as thought the screen was "bakards" <g>


Posted by jim evans on May 2, 2008, 11:10 pm

>>Turn the screen around and hook the rollers in the track?
>>
>
>Good one. The photo did seem as thought the screen was "bakards" <g>

That was to show the rollers. If I had it turned around you would not
have been able to see the rollers and could have said "what rollers?"
I don't see no rollers.

Posted by Oren on May 2, 2008, 11:38 pm
On Fri, 02 May 2008 22:10:17 -0500, jim evans

>
>>>Turn the screen around and hook the rollers in the track?
>>>
>>
>>Good one. The photo did seem as thought the screen was "bakards" <g>
>
>That was to show the rollers. If I had it turned around you would not
>have been able to see the rollers and could have said "what rollers?"
>I don't see no rollers.

I knew the rollers were there, because you mentioned them. Most folks
with these type doors: as far as I know, are familiar with them. I bet
many folks in this group have them.


Page 1 of 5       1 2 3 > last >>
Similar ThreadsPosted
Sliding patio door track April 23, 2007, 9:37 pm
Rubber seal for Patio screen door July 22, 2008, 11:10 pm
There MUST be a trick to installing spline in patio screen panel... June 13, 2007, 11:10 pm
Track lighting on GFCI May 31, 2006, 10:23 am
Track lighting on GFCI? May 31, 2006, 11:48 am
Track lighting on GFCI? May 31, 2006, 11:52 am
track lighting problem March 23, 2007, 12:29 pm
Track Light installation April 3, 2007, 9:01 am
HELP!! Track lighting question April 3, 2007, 11:53 am
Track your mileage and gas consumption May 14, 2008, 11:09 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap