Home Page link

How do I know if my expansion tank is water logged?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
How do I know if my expansion tank is water logged? silenceseeker2003 10-21-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on October 21, 2006, 5:40 pm


The story begins when I dicovered that the relief valve (of my home's
heating system gas-based heater) discharges about 1/4 cup of water
daily.

A technician from the gas company (called for a different problem) that
saw this immediately pointed to the Amtrol expansion tank (Extrol model
#30) as the culprit. He said he could tell just by knocking on the tank
and listening whether it is a hollow sound or not.

After he went, I tried this myself but I actually noticed that the top
part (which should be filled with water) does not sound hollow, while
the bottom part (which should be filled with air only) sounds hollow.
Isn't this the way it is supposed to be? If so, what made him say this
is the expansion tank?

Also, while he said that the expansion tank should be replaced, I
noticed a threaded air valve at the bottom of the tank, which looks
like exactly the ones found in bicycle tubes. Is it possible that I can
get away with simply re-filling some air in the tank, instead of going
into the expense of replacing the tank?

It should be noted that I have no intention of replacing the tank
myself, but rather let a professional heating plubmer do that. However,
I feel that I need to gather as much information about the problem as
possible, before going ahead with ordering a repair. One plumber I
called said the expansion tank alone will cost me $250 (excluding
labor!). I found that same exact tank for sale on the Internet $43.55
...


Thanks!
Sam


AppliancePartsPros.com, Inc.
Posted by on October 21, 2006, 5:57 pm



silenceseeker2003@yahoo.com wrote:
> The story begins when I dicovered that the relief valve (of my home's
> heating system gas-based heater) discharges about 1/4 cup of water
> daily.
>
> A technician from the gas company (called for a different problem) that
> saw this immediately pointed to the Amtrol expansion tank (Extrol model
> #30) as the culprit. He said he could tell just by knocking on the tank
> and listening whether it is a hollow sound or not.
>
> After he went, I tried this myself but I actually noticed that the top
> part (which should be filled with water) does not sound hollow, while
> the bottom part (which should be filled with air only) sounds hollow.
> Isn't this the way it is supposed to be? If so, what made him say this
> is the expansion tank?
>
> Also, while he said that the expansion tank should be replaced, I
> noticed a threaded air valve at the bottom of the tank, which looks
> like exactly the ones found in bicycle tubes. Is it possible that I can
> get away with simply re-filling some air in the tank, instead of going
> into the expense of replacing the tank?
>
> It should be noted that I have no intention of replacing the tank
> myself, but rather let a professional heating plubmer do that. However,
> I feel that I need to gather as much information about the problem as
> possible, before going ahead with ordering a repair. One plumber I
> called said the expansion tank alone will cost me $250 (excluding
> labor!). I found that same exact tank for sale on the Internet $43.55
> ...
>
>
> Thanks!
> Sam


put an auto tire pressure guage on the air valve and check the pressure
is still as specified in the owners manual.

If water comes out of the air valve you need a new tank , or a repair
kit.


Posted by m Ransley on October 21, 2006, 7:35 pm


Also to small a tank will cause the boiler to overpressure as the water
heats. What pressure do you reach, could also be a bad pressure valve.


Posted by Mark on October 21, 2006, 9:00 pm



m Ransley wrote:
> Also to small a tank will cause the boiler to overpressure as the water
> heats. What pressure do you reach, could also be a bad pressure valve.

does this model of tank have a bladder to seperate the air and the
water?

Mark


Posted by on October 22, 2006, 11:18 am


Mark wrote:
> does this model of tank have a bladder to seperate the air and the
> water?

Yes, it does. Does this provide additional info that can help?

BTW, I followed marks542's suggestion: I put a bicycle air pump with
pressure gage (an auto tire one won't work because the threaded valve
on the tank fits a bicycle pump, not an auto tire one) and attempted to
measure.

My first observation was that **no water is leaking** (that's good,
right?)

However, the pressure gauge on my bicycle pump only starts to show
calibrated reading from 20 psi and above. The Extrol 30 needs only
12psi. I heard some air discharging in the process and so I was afraid
to depleat the air in the tank (which would exacerbate the problem -
not good on a Sunday morning...).

BTW, the air that came out of that valve was stinky (like dead fish or
something). Weird.

What do you suggest that I do next?

Thank you all for your help!
Sam


Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Forced hot water system, want to purge air in second floor baseboards, no expansion tank HELP! November 5, 2006, 7:36 pm
Re: Expansion tank December 17, 2005, 5:19 am
Do I need an expansion tank? July 19, 2007, 11:40 pm
Boiler Expansion Tank June 5, 2006, 9:12 pm
leak in thermal expansion tank October 24, 2005, 6:53 am
How to test a thermal expansion tank? December 13, 2005, 8:20 am
Expansion tank vs relief valve March 29, 2007, 12:10 am
Buderus vs. Weil-McLain boiler, and expansion tank question July 31, 2007, 9:51 am
Water Storage Tank - Plumbing the Pump & Pressure Tank August 7, 2006, 3:29 pm
Gas hot water tank vs. Electric hot water tank September 29, 2006, 10:56 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap