|
Posted by Harry K on October 15, 2007, 11:18 am
> On 15 Oct, 09:25, alvinamo...@notmail.com wrote:
>
>
>
>
>
> > I will be having a delivery this week of concrete. I am getting 3.25
> > yards. Two and a quarter yards will make a 9 x 20 foot driveway
> > extension in front of my garage. The other yard will go into a nearby
> > shed to make a cement floor to replace the dirt floor, which is 6 X 12
> > ft., plus a small pad outside the door from whatever is left.
>
> > For the driveway extension the truck can drive right to it. But the
> > shed is not accessible by truck. That one yard needs to be taken into
> > the shed with wheelbarrows. I am trying to comprehend how many
> > (average size) wheelbarrow trips will have to be made to carry that
> > one yard to the shed. I am asking to get a rough idea so I know how
> > many friends and wheelbarrows to have on hand. The delivery company
> > said that their delivery guys cant spend a lot of time at one place,
> > so I need to be ready to get the cement moved fast.
>
> > I know someone is going to ask me what I mean by average size
> > wheelbarrow. I dont know how they are rated, but the two that I have
> > are the ones sold at most garden supply places, department and
> > hardware stores for the average homeowner. My guess is the "bucket"
> > is about 28" wide, 35" long, and 10" deep (of course the corners are
> > rounded and the bucket tapers in at the bottom.
>
> > My guess (and only a guess), is one wheelbarrow load can hold about
> > 2.5 cubic feet, (without spilling all over the place), and a full yard
> > of concrete is 27 cubic feet. So my guess is about 11 trips. Does
> > this sound about right?
>
> > One other thing. Since I plan to use whatever concrete is left over
> > to make a pad in front of the shed door, outside, what is the best way
> > to make an adjustible form? My idea is to make the form the actual
> > width I want (which is 41"), then just leave the end board (away from
> > the door) without nails or stakes, so I can fasten it after the cement
> > is there and I know how much cement is left. If by chance the pad
> > seems too small, I have a few bags of redi-crete to use up, so I can
> > mix them.
>
> > Thanks
>
> > Alvin
>
> Any chance of the delivery company using a boom truck to deliver the
> concrete directly to where the shed will be or is that way too
> expensive for this size job?
>
> http://www.putzmeister.com/products/boompumps/index.cfm- Hide quoted text -
>
> - Show quoted text -
First; Unless you have wheeled mud before, do not fill the barrow
full. Even if you have, do not fill the barrow full. Better several
extra trips than spilling a load. Concrete is _heavy_.
Second: Be sure the path to the shed is smooth and firm. If needed,
lay down sheets of plywood overlapped so the loaded barrows don't run
into the 'lap'.
Harry K
|