Home Page link

How to do slide in range?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
How to do slide in range? gf 07-26-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on July 26, 2007, 6:59 pm
We want to replace our free standing range with slide in. How do you
work it if my counter tops are 25 1/4" and the range is 27" or so in
depth? I assume it has a lip on each side that sits on the counter-top
but then that would stick out past the edge of the counter?


Posted by RBM on July 26, 2007, 7:38 pm
Yep



> We want to replace our free standing range with slide in. How do you
> work it if my counter tops are 25 1/4" and the range is 27" or so in
> depth? I assume it has a lip on each side that sits on the counter-top
> but then that would stick out past the edge of the counter?
>



Posted by Tom G on July 27, 2007, 1:49 am

> We want to replace our free standing range with slide in. How do you
> work it if my counter tops are 25 1/4" and the range is 27" or so in
> depth? I assume it has a lip on each side that sits on the counter-top
> but then that would stick out past the edge of the counter?
>
I think you'll find that the total depth might be 27" or so but that is
including the oven door and any handles. The door should line up (the back
of it) with the front of the cabinet appoximately in order that heat
escaping the door won't discolor the cabinets. The cooktop should pretty
much line up with the front edge of the countertop. If I remember
correctly, the cooktop doesn't always overlap the countertop, the main
difference between a slide-in and a free standing is the lack of a control
console on the slide-in. I assume you are replacing the countertop also,
as, unless you purchase the optional filler for the area where the console
normally is, you'll have a gap back there. A drop-in range, however does
overlap the countertop and is supported by the countertop and /or a chine on
the side of the cabinets or a filler box underneath to support the range.
Slide-in sits on the floor like a free standing and usually has a drawer at
the bottom...drop-in lacks this and has a cabinet filler strip in the front.
Unless they've changed code, the slide-in and free standing both use a range
cord with plug while the drop-in is hardwired to a box behind it.

All I can think of,

Tom G.



Posted by Marina on July 27, 2007, 9:06 am
gf@naturalproperties.com wrote in

> We want to replace our free standing range with slide in. How do you
> work it if my counter tops are 25 1/4" and the range is 27" or so in
> depth? I assume it has a lip on each side that sits on the counter-top
> but then that would stick out past the edge of the counter?
>
>

I have a slide in. If mice get in the basement, they sometimes run up the
wiring and into the stove and can get into the room.
ewwwwwwww.

Posted by EXT on July 27, 2007, 11:33 am
Download the manufacturer's installation instructions from their website and
check out the details.

> We want to replace our free standing range with slide in. How do you
> work it if my counter tops are 25 1/4" and the range is 27" or so in
> depth? I assume it has a lip on each side that sits on the counter-top
> but then that would stick out past the edge of the counter?
>



Similar ThreadsPosted
slide-in range September 26, 2008, 2:40 pm
sears slide in gas range. March 10, 2007, 12:45 pm
spillage under a slide-in range - preventing? January 9, 2006, 4:05 pm
Kenmore elite slide-in range March 23, 2006, 10:55 pm
Slide out pantry January 7, 2006, 7:25 pm
New $475 windows slide August 5, 2006, 3:54 pm
Slide on a Hill November 22, 2006, 5:50 pm
Old drawer slide???? June 27, 2008, 7:24 pm
Re: Old drawer slide???? June 27, 2008, 7:45 pm
Re: Drawer slide hardware???? June 27, 2008, 11:52 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap