If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by on July 29, 2008, 11:20 pm
Greetings,
I need to replace seven basement windows and have settled on vinyl
sliders for the 38x25 brick openings.
I've been to a zillion different web sites and read about different
manufacturers (Alside, Gilkey, Feldco [local], Thermal Industries,
Simonton, American Craftsman...) and what it seems to really boil down
to is the installer. A lousy installer can trash the most expensive
window and a good installer can make the most of the low- or mid-range
products.
I've read online reviews until I'm cross-eyed and again, but while
window brands may be available nationally, the install is truly a
local issue and reviews aren't numerous enough to be meaningful.
So, how exactly do you know that you're hiring a quality installer?
The big box sub-contractors are such a crap shoot, and although Sears
Home supposedly stands (eventually) behind their installers, they were
very pricey, meaning I'm paying for someone's bad install, somewhere.
~JMA
|
|
Posted by SteveB on July 29, 2008, 11:41 pm
jacy@gmail.com wrote:
> Greetings,
>
> I need to replace seven basement windows and have settled on vinyl
> sliders for the 38x25 brick openings.
>
> I've been to a zillion different web sites and read about different
> manufacturers (Alside, Gilkey, Feldco [local], Thermal Industries,
> Simonton, American Craftsman...) and what it seems to really boil down
> to is the installer. A lousy installer can trash the most expensive
> window and a good installer can make the most of the low- or mid-range
> products.
>
> I've read online reviews until I'm cross-eyed and again, but while
> window brands may be available nationally, the install is truly a
> local issue and reviews aren't numerous enough to be meaningful.
>
> So, how exactly do you know that you're hiring a quality installer?
> The big box sub-contractors are such a crap shoot, and although Sears
> Home supposedly stands (eventually) behind their installers, they were
> very pricey, meaning I'm paying for someone's bad install, somewhere.
Referrals....
Ask your friends.
If you get someone from the borgs, insist on checking references. If
they're good, they'll happily provide names of people who will let you
see the work. If they hesitate, tell them, "I'll let you know."
--
Steve Bell
New Life Home Improvement
Arlington, TX
|
|
Posted by ransley on July 30, 2008, 11:19 am
On Jul 29, 10:20=A0pm, j...@gmail.com wrote:
> Greetings,
>
> I need to replace seven basement windows and have settled on vinyl
> sliders for the 38x25 brick openings.
>
> I've been to a zillion different web sites and read about different
> manufacturers (Alside, Gilkey, Feldco [local], Thermal Industries,
> Simonton, American Craftsman...) and what it seems to really boil down
> to is the installer. A lousy installer can trash the most expensive
> window and a good installer can make the most of the low- or mid-range
> products.
>
> I've read online reviews until I'm cross-eyed and again, but while
> window brands =A0may be available nationally, the install is truly a
> local issue and reviews aren't numerous enough to be meaningful.
>
> So, how exactly do you know that you're hiring a quality installer?
> The big box sub-contractors are such a crap shoot, and although Sears
> Home supposedly stands (eventually) behind their installers, they were
> very pricey, meaning I'm paying for someone's bad install, somewhere.
>
> ~JMA
The best way is double check the work yourself as it goes and before
you pay, read instalation manuals and warranty online at a site like
Pella. A few ideas, the window cant fit to tight, be screwed to tight
that the frame bows and it sticks, the space inbetween the window and
frame should be insulated, I think fiberglass. Caulk everything. Most
important is Plumb, Level and Square. Pella , Anderson, dont allow
more than 1/8" out or warranty is void from day one. Some comanies may
have zero tolerance, im not sure. Or hire someone to oversee it. A way
to be sure is hire the companies crew, Pella, Marvin, Anderson have
certified stores and installers. I had Pellas and Anderson put in by a
hack that had to be redone. Consider Glass block, you get 2-3x the
insulating R value than glass. Yes hacks do ruin the best windows and
doors from rushing jobs.
|
|
Posted by on July 30, 2008, 6:23 pm
I had HD do a whole house worth of windows for me. I piecemealed it as
I had the money. I ended up with 2 different crews over time. Home
depot makes sure it gets done right. I had very little problem..
|
|
Posted by on July 30, 2008, 6:53 pm
I had HD do a whole house worth of windows for me. I piecemealed it as
I had the money. I ended up with 2 different crews over time. Home
depot makes sure it gets done right. I had very little problem..
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Looking for a good A/C installer (Manual J) - Denver Metro | June 11, 2007, 11:20 am |
| How to find a good contractor? | February 11, 2005, 12:03 am |
| How do you find a good contractor? | August 22, 2006, 7:30 pm |
| Best way to find a good contractor? | July 15, 2007, 8:23 am |
| Any suggestions on how to find a good roofer | June 27, 2008, 8:49 am |
| how to find a good builder, plumber, electrician etc | December 4, 2006, 8:15 am |
| Re: HI AMP ELECTRIC asks Can you find a good reliable electrician or contractor? | October 16, 2008, 8:38 am |
| Replacing Glass In Storm Window and I need to find a place to buy new gasket | July 30, 2006, 1:41 am |
| Leak Around Window - I can't find the source. Request advice or comments, please. | March 12, 2007, 8:34 am |
| Acrylic Magnetic Window for soud proofing. Any good ?? | November 13, 2007, 1:04 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap