Home Page link

How to protect and use my new EPDM roof?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
How to protect and use my new EPDM roof? Bob F 08-11-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Cliff Hartle on August 12, 2006, 8:43 am
True linoleum (http://en.wikipedia.org/wiki/Linoleum) could probably handle
the weather because of how its made but vinyl sheet goods (what you most
likely are refering to) usually has some sort of paper like or felt like
backing that could absorb water.


>I have a porch floor /roof that has just been professionally covered
> with EPDM. I am looking for the best way to protect it from wear, etc.,
> without damaging it in the process. Would it be practical to install
> linoleum or other "sheet goods" on part of it? Does anyone know about
> industrial mats that are sometimes used for walkways on EPDM?
> We have talked about a "floating deck, but the roofer advises it would
> gather dirt and trash underneath and would need to be removable for
> cleaning and repairs.
>
> This area is itself covered and protected by a roof overhead.
>
> Suggestions? Experiences? Horror stories?
>



Posted by Bob F on August 12, 2006, 10:49 am
Hadn't thought about the water absorbing backing... I am also worried
about being able to cement it down without compromising the EDPM. I am
beginning to think a removable deck is the way to go. Thanks for your
helpful advice.

This new roof came about because the roof above leaked AND the
floor/roof became compromised due to wet leavesand pine straw
collecting on the old surface, especially around support posts. My
hope is that I have eliminated two problems and can count on two layers
of protection- but I still would like to use the area as a regular
porch. Any further thoughts much appreciated.


Cliff Hartle wrote:
> True linoleum (http://en.wikipedia.org/wiki/Linoleum) could probably handle
> the weather because of how its made but vinyl sheet goods (what you most
> likely are refering to) usually has some sort of paper like or felt like
> backing that could absorb water.
>
>
> >I have a porch floor /roof that has just been professionally covered
> > with EPDM. I am looking for the best way to protect it from wear, etc.,
> > without damaging it in the process. Would it be practical to install
> > linoleum or other "sheet goods" on part of it? Does anyone know about
> > industrial mats that are sometimes used for walkways on EPDM?
> > We have talked about a "floating deck, but the roofer advises it would
> > gather dirt and trash underneath and would need to be removable for
> > cleaning and repairs.
> >
> > This area is itself covered and protected by a roof overhead.
> >
> > Suggestions? Experiences? Horror stories?
> >


Posted by George E. Cawthon on August 12, 2006, 6:17 pm
Bob F wrote:
> Hadn't thought about the water absorbing backing... I am also worried
> about being able to cement it down without compromising the EDPM. I am
> beginning to think a removable deck is the way to go. Thanks for your
> helpful advice.
>
> This new roof came about because the roof above leaked AND the
> floor/roof became compromised due to wet leavesand pine straw
> collecting on the old surface, especially around support posts. My
> hope is that I have eliminated two problems and can count on two layers
> of protection- but I still would like to use the area as a regular
> porch. Any further thoughts much appreciated.
>
>
> Cliff Hartle wrote:
>> True linoleum (http://en.wikipedia.org/wiki/Linoleum) could probably handle
>> the weather because of how its made but vinyl sheet goods (what you most
>> likely are refering to) usually has some sort of paper like or felt like
>> backing that could absorb water.
>>
>>
>>> I have a porch floor /roof that has just been professionally covered
>>> with EPDM. I am looking for the best way to protect it from wear, etc.,
>>> without damaging it in the process. Would it be practical to install
>>> linoleum or other "sheet goods" on part of it? Does anyone know about
>>> industrial mats that are sometimes used for walkways on EPDM?
>>> We have talked about a "floating deck, but the roofer advises it would
>>> gather dirt and trash underneath and would need to be removable for
>>> cleaning and repairs.
>>>
>>> This area is itself covered and protected by a roof overhead.
>>>
>>> Suggestions? Experiences? Horror stories?
>>>
>

First you need to know what EPDM is. It is
Ethylene Proylene Diene Monomer. It is not vinyl
it is a rubber product. And it consists of one
layer. In fact many if not most travel trailers
have such a roof, but it is also used on flat
roofs. You should not walk directly on it. If
you want a deck, then suspend the deck above the
EPDM, don't lay it on it.

Page 2 of 2       << first < 1 2
Similar ThreadsPosted
repair yes, protect no December 8, 2005, 2:04 pm
A/C - How to protect the sill? May 26, 2006, 8:54 pm
Freeze protect September 29, 2006, 9:07 am
Wow! Electric Protect July 23, 2007, 3:40 pm
Re: Protect your computer April 3, 2008, 10:03 am
Plastic over windows to protect? March 5, 2006, 9:57 am
Protect your largest investment!!! October 1, 2006, 9:27 pm
how to protect pipes if no heat? December 4, 2006, 7:59 am
Best way to GFCI protect a pool? March 26, 2007, 3:31 am
Protect your computer with AdAlert July 28, 2007, 11:58 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap