|
Posted by on January 7, 2008, 8:50 pm
I have a small utility closet whith louvered doors which houses the
hot water heater and the gas forced air furnace. My issue is that this
closet is just off to the side of the living room and the return is
one large vent facing directly into the room. When the furnace kicks
on the sound of the motor, fan, and rushing air through the ducts is
extremly loud and anoying. This issue is holding me up from upgrading
the system to include central air. I could not immagine having to put
up with this all year.
To help reduce the noise as much as possible I would like to insulate
the walls in the closet, wrap the furnace and exposed duct whith
insulation, and install a solid door. If possible maybe even duct the
air return in from the attic. The previous owner has a 6' x 5'
circular foil vent that runs into the attic. I think this should be
sufficient for ventalation and pilot lights after I make the changes
above.
Am I on the right track here or am i going to creeate a series of
code violations?
Welcome all ideas and suggestions.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap