|
Posted by CL (dnoyeB) Gilbert on June 20, 2005, 1:30 pm
meirman wrote:
> In alt.home.repair on Fri, 17 Jun 2005 22:23:27 -0500 "Randy Cox"
>
>
>>
>>>I bought a bicycle rack from home depot and installed it in my garage, now
>>>my wife says it looks like shit, so now I have to move it somewhere else.
>>>But that rack comes with One-way screws, (like this one:
>>>http://www.hudsonfasteners.com/sec/sec_ow_rhms.htm) I can't get it
>>>out...help...
>>>
>>>is there a tool I can buy to remove the screw? this screws are stupid..
>>>actually my wife is stupid too.
>>>
>>>help.
>>
>>There are several good suggestions to choose from. If the others don't work
>>there is always the ez-out. They make a set of dies that have reverse
>>threads on them. You drill a small hole down the center of the shaft of the
>
>
> A variation on this is to use a left-handed drill bit when drilling
> the hole, and run the drill backwards. I don't know how big these
> screws are or what they are in or how well stuck they are, and like
> you I'm not saying this is the first option to try. I started doing
> this when I needed to dissassemble B&D appliances that used screws
> with weird heads**. Often they started to come out when the hole was
> just more than barely started. (later I got a set of bits for wierd
> screws)
>
> **to keep people from repairing their own applicances. Once I took
> apart an air pump cigarette lighter plug, and inside was a blown fuse.
> Easy to replace, for 35 cents. What would the service department have
> done?
>
> Left-handed drill bit start cheap enough but get expensive real soon
> as the size gets bigger. Can find them at almost no stores**,
> probably only Vermont American on the web.
>
> ***Although it was fun to ask clerks and see if they believed me.
>
>
>
>>stuck screw. Then you screw in the reverse threat die until it tightens up.
>>Remember, being reversed thread you screw it in counter-clockwise. When it
>>will screw in no more, it will remove the screw. It works for rounded bolt
>>heads or whatever. I've used mine maybe four times in the 15 years I've had
>>the set. Usually I can grip the screw head with channelocks or wirecutters
>>or something. If I had to find the easeouts..........that would be as big a
>>chore as working the screw out.
>>
>>Randy R. Cox
>>
>
>
>
> Meirman
> --
> If emailing, please let me know whether
> or not you are posting the same letter.
> Change domain to erols.com, if necessary.
When I run into these, or even just an old screw around the house,
Depending on the situation I usually drill them out. Once you drill
that hole in the screw, the screw should loose a lot of its sticking
power anyway. Just insert the thingy and tap a few times, then back it out.
Right too for the right job. Dont try to just rig something up, way
easier to buy the thing and remove it. Can't remember what its called
though.
In situations like bathroom doors where both ends of the screw are
exposed I usually dont need the tool, and can just drill the whole screw
out. If you get the right size bit, the screw will eventually come out
when you reverse the drill. (if its exposed on both sidez)
--
Respectfully,
CL Gilbert
For a free Java interface to Freechess.org see
http://www.rigidsoftware.com/Chess/chess.html
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap