|
Posted by NapalmHeart on August 15, 2005, 11:36 pm
>
>> I'm putting in a bathroom exhaust fans into two adjoining bathrooms
>> that never had an exhaust fan installed by the builder.
>>
>> My question is, the two fans will be no further than a few feet apart.
>> I bought fans that have a one way flapper. Can I simply join the ducts
>> from both of them in the attic and vent out of one roof vent?
>
> Check with your local building department. This was nixed quite a while a
> go
> where I live.
>
>>
>> Venting out of the side of the attic wall is also an option as it's
>> only a few feet away, but I assume venting out to the roof is best?
>
> the shorter the pipe and the less bends the better.
> Where I live the vent on the fan is 3 inch and they run 4 inch pipe.
> Personally I do not like cutting holes in the roof. Unless there is no
> other
> way
>
>
>
>> Also, is there a website that shows in detail how to install the roof
>> caps?
>
>
>
I did this 2 years ago and it passed inspection.
Ken
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap