|
Posted by Carolina Breeze HVAC on August 5, 2005, 11:59 am
> You're not going to try doing this yourself, are you?
Sure sounds like it.
Hope hes done a room by room manual T..NOT a J and then, a proper manual D
to insure that his BTUh load on each room is handled.
>
> --
> Scott McDaniel
> InfoTrakker Software
>>
>>>Package units, for the most part, need to be planned when the house is
>>>built so that they can route the main supply plenum and the return air
>>>to the air handler in the pacage. This is particularly true for a
>>>slab on grade foundation.
>>>
>>>I have a package system but it was installed when the house was built.
>>>the supply and return ducts are arranged around a couple of back to
>>>back closets. One of the closets has a built up floor to handle the
>>>return duct. it goes through the closet and then to a central hall.The
>>>room supply ducts are in the attic. The supply duct makes a 90 up
>>>between the two closets )behind one and on the side of another and
>>>then headers off to each of the floors with ceiling registers.
>>>
>>>With a split unit it is easier to retrofit because the only thing you
>>>have to route is the coolant lines and you have to find a central
>>>place for the evaporater and blowers
>>>
>>>By the way, I like the package unit. The evaporator and air handling
>>>blowers are outside in the package and the noise in the house is much
>>>less than other houses i've had with split unitsl.
>>>
>>>
>>>>
>>>>Hello,
>>>>Here in Florida i called a heating/cooling place to have a heat pump
>>>>installed.
>>>>They said i couldnot have a "Packaged Heat Pump" because i donot have a
>> trailer
>>>>(mobile home) where they can run the duct work underneath the floor. I
>> have
>>>>a house and they have to run the duct work in the attack, therefore i
>>>>cannot
>>>>have a "Packaged Heat Pumb", and must have a "Split-System Heat Pump"
>>>>because
>>>>of the ductwork. Is that true?
>>>>Here is what i mean by "Packaged Heat Pump" and "Split-System Heat
>>>>Pump":
>>>>Packaged Heat Pump:
>>>>http://www.alloysafe.com/products.php?subcatid=3&catid=1
>>>>Split-System Heat Pumps:
>>>>http://www.alloysafe.com/air_conditioning/goodman_heat_pumps.php
>>>>
>>>>_______________________________________________________________________________
>>>>Posted Via Uncensored-News.Com - Accounts Starting At $6.95 -
>>>>http://www.uncensored-news.com
>>>> <><><><><><><> The Worlds Uncensored News Source
>>>> <><><><><><><><>
>>>>
>>>
>> Hello,
>> What does the "duct" connection on the Packaged unit look like?
>> How big is it?
>> What size ducts does it feed?
>> Can the ducts from a Split Unit (or other kind of central furnace/air
>> conditioner)
>> be used?
>> Where can i see pictures of the duct-work hooked up?
>>
>>
_______________________________________________________________________________
>> Posted Via Uncensored-News.Com - Accounts Starting At $6.95 -
>> http://www.uncensored-news.com
>> <><><><><><><> The Worlds Uncensored News Source
>> <><><><><><><><>
>>
>
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap