Home Page link

Kenmore Master Flame

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Kenmore Master Flame lilca420 06-30-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on June 30, 2007, 11:07 am
While cleaning our grill my boyfriend knocked the ignition wire
loose!!

I can't figure out where it goes. I looked under it and don't see
where a connection had been. Any and all help is really needed!

Thank you!!


Posted by Travis Jordan on June 30, 2007, 2:15 pm
> While cleaning our grill my boyfriend knocked the ignition wire
> loose!!
>
> I can't figure out where it goes. I looked under it and don't see
> where a connection had been. Any and all help is really needed!

The igniter wire terminal usually pushes on to the back end of the igniter
button, as shown here:
http://www.sears.com/sr/javasr/product.do?cat=Grills&pid=07110081000



Posted by on July 1, 2007, 6:57 am
>
> > While cleaning our grill my boyfriend knocked the ignition wire
> > loose!!
>
> > I can't figure out where it goes. I looked under it and don't see
> > where a connection had been. Any and all help is really needed!
>
> The igniter wire terminal usually pushes on to the back end of the igniter
> button, as shown
here:http://www.sears.com/sr/javasr/product.do?cat=Grills&pid=07110081000

Thank you!


Posted by mm on June 30, 2007, 4:45 pm
On Sat, 30 Jun 2007 08:07:14 -0700, lilca420@yahoo.com wrote:

>While cleaning our grill my boyfriend knocked the ignition wire
>loose!!
>
>I can't figure out where it goes. I looked under it and don't see
>where a connection had been. Any and all help is really needed!
>
>Thank you!!

Which end is still connected and which end isn't?


Posted by on July 1, 2007, 6:57 am
> On Sat, 30 Jun 2007 08:07:14 -0700, lilca...@yahoo.com wrote:
> >While cleaning our grill my boyfriend knocked the ignition wire
> >loose!!
>
> >I can't figure out where it goes. I looked under it and don't see
> >where a connection had been. Any and all help is really needed!
>
> >Thank you!!
>
> Which end is still connected and which end isn't?

The side on the button is still connected! Its the side that goes to
the burner that isn't!


Similar ThreadsPosted
What is the best (flame resitent) insulation to use October 18, 2005, 7:50 am
Oil smell from furnace (when fan is on but flame out, I think) December 10, 2006, 9:38 am
Pilot flame too intense October 14, 2007, 3:52 pm
Furnace pilot flame adjust October 27, 2005, 1:07 am
Trianco Home Flame won't light November 28, 2005, 7:01 am
Gas Furnace Flame Jets Start, then Die Out February 26, 2007, 11:20 am
Gas Furnace problem:no flame, fan runs March 6, 2007, 1:54 pm
Gas Water Heater, Soot and Bad Flame July 2, 2007, 12:27 pm
Gas Furnace flame color & efficiency November 23, 2007, 1:58 pm
Water heater flame-out when dryer runs September 4, 2005, 9:32 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap