Home Page link

Kenmore (Sears) washer repair

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Kenmore (Sears) washer repair Uzi Barzilai 07-30-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Uzi Barzilai on July 30, 2007, 2:37 pm
Thanks, Terry,

Sorry to reply directly - I could not see this in the group.

You sound very knowledgeable so I decided to
operate, again, my machine and report the observations

1. It is a "belt-drive" rather than "direct-drive"
2. When turn on - it waits for the water to rise before operations.
3. As soon as the agitator starts - the drum starts to rotate.
(but may be not as fast as spinning)
4. Dry- spinning does not wait for the water to be removed.
(The pump works) - a lot of splashing at the beginning.
5. Lifting the lid - does not stop the above.
Not a problem by itself, but I believe it is not an independent failure
but rather another manifestation of the main one
as it was working fine until now.

Please advise what part(s) I should buy & replace
and any other advice you kindly can give.

With much appreciation,
Uzi,
7-30-07
==============================
This is a At 10:47 PM 7/29/07, you wrote:
You lost neutral drain, this is not a big issue or usually a problem.
But if you want the neutral drain back replace the gearcase
and may as well do the clutch at the same time.
As for the not stopping your lid switch is most likely the problem
but if the motor stops then the brake is at fault (oil from the gearcase?).

===================================================
Newsgroups: alt.internet.appliances
Sent: Thursday, July 26, 2007 8:29 AM
Subject: Kenmore washer repair


I'm trying to repair my washer.
It is a top loaded Kenmore / Sears machine
about 20 years old.

The problem is that the dry- spinning does not wait
for the water to be removed. (The pump works)

Also, I noticed, that while it is spin-drying opening the
lid does not stop the action. (It suppose to and always did)

Any ideas will be appreciated.
Thanks,
Uzi



Similar ThreadsPosted
Kenmore washer repair July 26, 2007, 8:25 am
Need Kenmore washer repair advice December 30, 2005, 11:21 pm
Kenmore washer repair manuals online(?) October 15, 2006, 7:06 pm
My details on "no spin" Kenmore or Whirlpool "Motor Coupling" upgrades, and washer repair. December 29, 2006, 3:39 pm
Kenmore (Sears) BI Vacs August 26, 2005, 4:14 am
Sears Kenmore Oven/Range October 23, 2005, 5:21 pm
Re: Sears Kenmore boiler float November 7, 2005, 4:20 am
Sears Kenmore Dryer noise June 4, 2006, 12:32 am
Sears Kenmore Fridge Not Cool! June 19, 2006, 11:27 pm
Now that I have it narrowed to a Sears Kenmore - bag or bagless? June 9, 2007, 5:02 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap