|
Posted by on December 15, 2006, 11:42 am
Yup, just used a SawsAll and cut the big outlet pipe, used a Fernco
connector and some PVC and bam.
gprimerib@gmail.com wrote:
> Garbage disposal into PVC p-trap, then it goes into some old brass (or
> copper) elbows and into the old 2" brass outlet pipe. Its leaking
> between the 2" and the elbow and it looks like it was soldered
> together.
>
> Whats the best way to replace this? Cut the 2" brass and fit one of
> those Fernco rubber/clamp fittings? I can then get some PVC from the
> p-trap to that fitting. Any advice appreciated.
|