|
Posted by Bob F on March 13, 2007, 4:36 pm
> > I picked up a year old Toro lawnmower from a moving sale.
> > I tried to start it up but nothing happens. It appears gas was left in
> > the lawnmower over the winter. Not sure any stabilizer was added,
> > probably not as it does not want to start. What should I do to try and
> > get it started? Deal was too good to pass up so I figured it was worth
> > the hassle.
> >
> > Thanks
>
> If it has a Tecumseh engine, check the flywheel key. If it has
> sheared, which is fairly common, the timing will be off and the engine
> will not run. Common failure mode is hitting a rock/brick/whatever
> with blade, stopping engine, inertia of flywheel shears key and
> flywheel keeps rotating, magnet on flywheel is no longer in proper
> location with respect to crank throw.
This happens to B&S engines also. Another symptom is hard
jerks on the rope while starting, often breaking the rope.
Bob
|