Home Page link

Linoleum for garage floor?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Linoleum for garage floor? Walter R. 09-02-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Walter R. on September 2, 2006, 3:15 pm
My garage floor is not as neat as I would like tit to be: There are some oil
droppings from my engine and my wife's car leaves a lot of black blotches
from her tires when she turns her wheels in the garage while the car is
stationary (she has trouble getting in and out of the garage).

I would use an epoxy finish but there are some areas on the concrete floor
with efflorescence, which would probably make the epoxy flake off.

For appearance sake, can I just buy some sheet linoleum and glue it to the
affected areas of the garage floor? Would the linoleum stick to the hot
tires?

Has anyone tried this? Thanks
--
Walter
www.rationality.net
-



PexSupply Save 50 468x60
Posted by hallerb@aol.com on September 2, 2006, 3:42 pm
leave bare concrete, or replace the floor and epoxy it.

with high undervehicle temps linoleum is a fire hazard and will distort
under tires too.

theres special under vehiclew mats made for this application but sorry
dont know the name


Posted by professorpaul on September 2, 2006, 4:29 pm
It is better if the floor is dead clean before you put on the epoxy.
The kit (I've used 2 of them on a double garage) has an acid etchant.
Says concrete should be at least a couple of months old, etc.

There are drip pan you can slide under a car to catch oil drips. Maybe
$10 in any good auto parts store. I have a Jeep Cherokee that oozes oil
and grease...

The tire problem is of concern... I have removed the epoxy in a couple
of spots with tire turning. I suspect I might not have gotten the epoxy
on thick enough. You should roll a genereous coat, IMHO.


Posted by BobK207 on September 2, 2006, 7:08 pm

professorpaul wrote:
> It is better if the floor is dead clean before you put on the epoxy.
> The kit (I've used 2 of them on a double garage) has an acid etchant.
> Says concrete should be at least a couple of months old, etc.
>
> There are drip pan you can slide under a car to catch oil drips. Maybe
> $10 in any good auto parts store. I have a Jeep Cherokee that oozes oil
> and grease...
>
> The tire problem is of concern... I have removed the epoxy in a couple
> of spots with tire turning. I suspect I might not have gotten the epoxy
> on thick enough. You should roll a genereous coat, IMHO.

If you're realy serious about painting the floor & wanting it to last

I would use Rustoleum Industrial DTM Epoxy Mastic (9100 System) 2
coats

http://www.rustoleum.com/Product.asp?frm_product_id=102&SBL=2&ddis=

here's the tech info on prep & application

http://www.rustoleum.com/tds/9100%20System_RO-51_2032990.pdf

I've been using this product on shop, lab & garage floors for 20+
years
years.

I have been extemely satisfied.

The last garage floor I painted was 5 years old when I prepped &
painted it.

It had some oil spots & some small (larger than harline) cracks. The
stuff's been down for 6 years. Mountain environment, snow, sometimes
tire chains, road ashes. Some cars w/ small oil leaks.

No summer peel off (yet)

So far so good (again) looks like I'll get at least another 10 years
before
I'll need to recoat (not sure it will be needed but to maintain coating
integrity). With the
second go 'round, the stuff will probably outlast me.

cheers
Bob


Posted by Joseph Meehan on September 2, 2006, 6:28 pm
Walter R. wrote:
> My garage floor is not as neat as I would like tit to be: There are
> some oil droppings from my engine and my wife's car leaves a lot of
> black blotches from her tires when she turns her wheels in the garage
> while the car is stationary (she has trouble getting in and out of
> the garage).
> I would use an epoxy finish but there are some areas on the concrete
> floor with efflorescence, which would probably make the epoxy flake
> off.
> For appearance sake, can I just buy some sheet linoleum and glue it
> to the affected areas of the garage floor? Would the linoleum stick
> to the hot tires?
>
> Has anyone tried this? Thanks

I would not consider linoleum for a garage floor. It likely would not
hold up to the hot tyres and oils etc that would get on it, and I would not
want the potential fire hazard. I would also be worried about it becoming
slippery when wet or oily.

I have seen a couple of tile products, one I believe was a rubber based
product and the other something more like vinyl.
Good Luck



--
Joseph Meehan

Dia duit



Similar ThreadsPosted
Linoleum floor curling near tub joint January 2, 2006, 9:49 am
Vinyl/Linoleum floor problem April 16, 2006, 7:10 pm
linoleum over ceramic floor tiles June 3, 2006, 8:20 pm
Wood floor over vinyl / linoleum August 16, 2006, 2:33 pm
Removing linoleum and adhesive from a kitchen floor August 8, 2005, 2:48 pm
Removing linoleum for tiling - what about the stuff stuck to the floor? February 12, 2005, 7:21 pm
Linoleum Tiles Over Real Tiles on Bathroom Floor December 21, 2007, 11:01 am
Garage Floor August 5, 2005, 10:12 pm
New Garage Floor October 20, 2005, 10:16 am
New garage floor April 8, 2007, 8:45 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap