Home Page link

Looking for 2 1/8 inch round door pulls

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Looking for 2 1/8 inch round door pulls Nospam 05-19-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Nospam on May 19, 2006, 4:32 am
I am looking for round door pulls, preferably in an antique pewter or
antique nickel finish. If someone could recommend a reputable place to
purchase these on-line, I would appreciate it.

Robert



Radiant Heat 468x60
Posted by Edwin Pawlowski on May 19, 2006, 6:16 am

> I am looking for round door pulls, preferably in an antique pewter or
> antique nickel finish. If someone could recommend a reputable place to
> purchase these on-line, I would appreciate it.
>

www.leevalley.com has a large selection of hardware. More important, they
have an impeccable reputation.



Posted by Norminn on May 19, 2006, 7:24 am
Edwin Pawlowski wrote:

>
>>I am looking for round door pulls, preferably in an antique pewter or
>>antique nickel finish. If someone could recommend a reputable place to
>>purchase these on-line, I would appreciate it.
>>
>
>
> www.leevalley.com has a large selection of hardware. More important, they
> have an impeccable reputation.
>
>
I went looking for a few brackets for drapery hardware to match some I
recently bought. HD was out, so I went to the 'net. Levelor, Kirsch,
Lowe, Target, HD, JCP websites .. no luck. Google on "kirsch rod
bracket" and the item number .. voila! .. the last three packages on the
planet were for sale on good ol' ebay. My tools will be scattered
around the house until they arrive, but I wasn't about to take down the
ones I have and start over :o)

Posted by Cheri on May 19, 2006, 12:12 pm






Nospam wrote in message ...
>I am looking for round door pulls, preferably in an antique pewter or
>antique nickel finish. If someone could recommend a reputable place to
>purchase these on-line, I would appreciate it.
>
>Robert
>

I've always had good luck and good service with www.vandykes.com You
might want to take a look there.

Cheri



Posted by RicodJour on May 19, 2006, 12:28 pm

Nospam wrote:
> I am looking for round door pulls, preferably in an antique pewter or
> antique nickel finish. If someone could recommend a reputable place to
> purchase these on-line, I would appreciate it.

Are you trying to match existing pulls? 2 1/8" is pretty large for a
pull - it's almost doorknob size. Most pulls for cabinets are smaller
as larger ones can tend to look a bit clunky. It's all relative to the
cabinet door size and style. Vandykes was a good suggestion, though
I'm not sure if they have anything that size.

R


Similar ThreadsPosted
Source for 2 1/2" OC cabinet door pulls? March 16, 2007, 11:51 am
mounting quarter round to a pella door December 15, 2006, 10:17 pm
Re: 26-inch wide door? April 30, 2006, 6:59 pm
1/4 inch gap in door - need to seal April 30, 2006, 7:31 pm
how to insulate a 6 inch warp on bottom of door seal December 2, 2007, 12:52 pm
Refrig: Freezer-compartment-door sometimes open quarter-inch or so April 28, 2008, 4:26 am
bending 1/2 inch wide stock to a 3/8 inch radius November 11, 2006, 3:06 pm
48 Inch Vanity between 2 walls...But 49 inch top wont fit February 9, 2006, 12:57 pm
knobs or pulls or both? October 31, 2007, 12:21 am
GAS LAWN MOWER TAKES 100 PULLS TO TURN OVER October 22, 2006, 7:57 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap