Home Page link

Looking for good quality replacement sliding doors

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Looking for good quality replacement sliding doors vic 02-15-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by USA1st on February 15, 2007, 11:49 pm


> > Sliders are an abortion that should be banned by the code. At
> > best they do not seal as well as normal doors and they are a
> > maintenance problem.
>
> > When I put on an addition the wife insisted that it have a sliding
> > door. I tried to change here mind but...so slider it was. Quality
> > Anderson door, and it wasn't but a couple years before she agreed with
> > me. Still stuck with it and still fighting the maintenance.
>
> > Harry Still stuck with it and still fighting the maintenance K
>
> What maintenance? My old cheap door was a PITA, but the Pella that has been
> in for about 12 years now is a well built 8' slider that gives us a nice
> view into the woods. It has needs no maintenance at all, aside form normal
> washing of the glass.
>
> Sorry you had a bad experience, but I'd put another slider in tomorrow. We
> love it, even in the very cold weather so we can watch the snow while
> keeping warm.

I love my Pella too! They are top notch!


PexSupply Full Banner
Posted by Larry and a Cat named Dub on February 16, 2007, 12:20 am


I have a Pella door that is 20 years old Wood with metal clad on thee
outside and works as well as the day we put it in. I hate their windows
(triple glazed PITA ) but the door is great. Look at the varieties of glass,
Reflective , Low E, the thickness available, look at the maintenance down
the road , How are the rollers made , Is the frame 2" wide or 4" How are the
corners joined? Stay away from a aluminum frames (different from wood clad)
because of conducting the cold One big consideration is the threshold thin
and flimsy or of substantial strength Look how the door seals interlock
when closed. As a former Handyman home repairman with 30yrs ex
I will repeat what a friend once told me

IF YOU GOT A TEN DOLLAR HEAD BUY A TEN DOLLAR HELMET

You get what you pay for
A quality installation is the key in many cases to the end results. Good
caulking ,properly installed flashing , after putting the door in seal
around the outside flange with foil tape before butting the siding back on
. If you use expanding foam brace the door first so the foam don't bow it.
Use minimal expanding foam.Use a 6' level not a 4' if you are installing
doors . (I used a 6' with a electronic level against the side)
Just to add a little humor I recently helps a friend install his door.
Special order low E glass He took the inside glass retainer off after I left
(He found his misplaced hardware bolts) and while was leaning it against the
wall the door fell forward to the floor. The air cushion between the door
and floor kept it from shattering. He had just moved all his tools out of
the way preparing to put them away. Good reason to work area clean.

> Have a sliding glass door in the kitchen which is letting in cold air
> causing a chilly kitchen.
> The original was a builders grade which is 18 years old.
> I want to replace the sliders with a new set and am looking for advice
> on which companies make the best sliding doors. Thanks for your help
>



Posted by Chris Hill on February 16, 2007, 1:00 pm



>Have a sliding glass door in the kitchen which is letting in cold air
>causing a chilly kitchen.
>The original was a builders grade which is 18 years old.
>I want to replace the sliders with a new set and am looking for advice
>on which companies make the best sliding doors. Thanks for your help


I don't think any of them are worth a darn. I don't care if they are
cheap or expensive. Put in a door with hinges.

Posted by on February 17, 2007, 8:14 am


>
> >Have a sliding glass door in the kitchen which is letting in cold air
> >causing a chilly kitchen.
> >The original was a builders grade which is 18 years old.
> >I want to replace the sliders with a new set and am looking for advice
> >on which companies make the best sliding doors. Thanks for your help
>
> I don't think any of them are worth a darn. I don't care if they are
> cheap or expensive. Put in a door with hinges.

The person didn't ask whether to replace sliders with hinged doors.
Some layouts and designs make sliders the option of choice.

I put in Aetrium sliders from HD. If you can get away with using
white, they have the in-stock ones for under $600. I ordered mine
because I wanted sandtone, for about $800 (6 foot). I have 3 of them
and they were considerably cheaper than the Andersons ($1200-1500).

Good luck


Page 2 of 2       << first < 1 2
Similar ThreadsPosted
Woodall Sliding Doors August 23, 2005, 1:11 pm
Patio Sliding Doors, Again June 11, 2007, 11:16 pm
High quality screen/storm doors for old houses August 15, 2006, 11:27 am
3 track sliding closet doors October 25, 2006, 10:50 pm
Replace sliding doors with bi-fold April 14, 2007, 4:22 pm
Sliding patio doors/Tile April 23, 2007, 7:23 pm
Replacing Patio Sliding Doors April 29, 2007, 7:37 am
portable (room) AC with sliding doors May 11, 2007, 12:38 am
Closet sliding doors - one sticks April 19, 2008, 2:20 pm
Kitchen Cabinet Refacing--beware Quality Doors from Texas! September 1, 2005, 4:32 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap