Low Output Pressure on Generac Pressure Washer

Posted by Arnie Goetchius on June 6, 2006, 8:23 pm

m Ransley wrote:

> Nozzle cleaner kit? try a different nozzle. Is garden hose putting 3-5
> gpm, is screen inlet filter clean, is oil in the pump. Does water come
> out fast without nozzle, is motor working good-hard, , govenor kicks in.
>

Motor is working hard but water doesn't come out very fast with or
without the nozzle. It may be a dirty screen inlet filter. Will check
that tomorrow.

Posted by Arnie Goetchius on June 6, 2006, 8:19 pm

It was a problem last fall and I'm just getting around to working on it now.

Art wrote:

> Is this the first use of the season? Could water have frozen in it over
> winter? That would kill the pump.
>
>

>> I have a 2300PSI Generac Pressure Washer powered by a 6 HP Tecumseh. The
>> water coming out doesn't have much more pressure then a garden hose. I
>> thought it was due to a dirty nozzle so I used the nozzle cleaner kit but
>> that did not improve the pressure.
>> I'm wondering if there could be a problem with the spray gun or are there
>> other places I should look for an obstruction?

>
>

Page 2 of 2 << first < 1 2

Similar Threads	Posted
Generac Pressure Washer - Replace or repair pump?	February 24, 2008, 2:40 pm
Electric pressure washer looses pressure after 8 sec.	August 12, 2005, 10:30 am
Karcher pressure washer loses pressure...	January 26, 2009, 6:57 pm
Generac Oil Pressure Switch	October 10, 2005, 10:25 am
Pressure washer - no high pressure	May 13, 2007, 9:07 pm
My Generac Megaforce 6500 generator has no output	March 12, 2006, 7:42 pm
Pressure Washer - Help	March 6, 2006, 7:37 pm
Looking for a pressure washer.....	May 19, 2007, 1:03 pm
Pressure washer	October 16, 2007, 5:38 pm
pressure washer	October 28, 2007, 7:18 am

Low Output Pressure on Generac Pressure Washer - Page 2