Maytag Electric Range - Strange beep and clock loosing time

Posted by nriech on January 15, 2007, 9:14 pm

I have a Maytag Precision Touch Control 500, model PER5750QAS.
Suddenly it has a different beep when using the touchpad and the clock
is running at about 30% speed. It will still cook and work fine so far
but wanted to know if there was something that could be done. I have
tried resetting the breaker but dont know what else to try.
Thanks!

Posted by Art Todesco on January 16, 2007, 5:25 pm

nriech@gmail.com wrote:
show/hide quoted text
It sounds like the clock's timing
circuit is not functioning properly.
This probably means, replace the clock.
However, you might try this. Remove
power from the clock for something like
24 hours. This ensures that all power
is bled off all circuits and everything
is now reset. Now try restoring power.
I've had several microprocessor
controlled units miraculously come back
from the dead in this manner.

Similar Threads	Posted
Faulty clock in Viking electric range	January 30, 2007, 10:47 pm
Timer/clock in circa 1978 electric range	November 28, 2005, 7:34 pm
clock on gas range	September 4, 2008, 5:40 pm
GE Gas Range Clock question	March 2, 2007, 10:44 am
Range clock - Disconnect it!	June 1, 2008, 11:50 am
Whirlpool drop in range clock question	August 1, 2005, 9:35 am
Analog clock...setting time	November 1, 2009, 10:49 am
Carrier Thermostat Clock not keeping time	October 12, 2006, 11:18 am
Kenmore Range Electronic Panel Clock Display Needs Replacement	February 25, 2006, 4:40 pm
Kenmore Range Electronic Panel Clock Display Needs Replacement	February 25, 2006, 4:41 pm