Maytag "Touch Control 500" Range Control Panel

Posted by james on February 8, 2009, 4:22 pm

We have this 5 year old glass top range with convection oven.
The element of the convection oven burnt out and none of the oven
elements work.The digital control panel is not operational, it is
blank. There appears to be no resets on the back and everything looks
fine. Is there a reset anywhere or a reset mode on the control panel?
Thanks

Posted by michael.s.davis on February 21, 2009, 10:39 am

On Feb 8, 3:22=A0pm, ja...@uvvm.uvic.ca wrote:
show/hide quoted text
The same thing happened to my range, almost exactly (timeframe and
everything). With some investigation I found that the control panal's
circuit board had a short and fried the connection to the temp sensor
for the oven.

Posted by james on February 26, 2009, 1:28 am

I have had a closer look and the oven control or clock which is fried.
It is all made of transistors and printed circuits. So for 300$ for
the clock and $200 for the convection oven element and fan I can buy a
new stove. Now isn't that just the most green solution a manufacture
can design to have a burnt out element send you back to buy another
stove after 4 and half years. What ever happened to the idea of a
fuse that burns out before the stove costs the consumer 500 just in
parts.
On Sat, 21 Feb. 2009 07:39:26 -0800 (PST), michael.s.davis@us.army.mil
wrote:
show/hide quoted text

Posted by Ed Pawlowski on February 26, 2009, 6:04 am

>I have had a closer look and the oven control or clock which is fried.
> It is all made of transistors and printed circuits. So for 300$ for
> the clock and $200 for the convection oven element and fan I can buy a
> new stove. Now isn't that just the most green solution a manufacture
> can design to have a burnt out element send you back to buy another
> stove after 4 and half years. What ever happened to the idea of a
> fuse that burns out before the stove costs the consumer 500 just in
> parts.
That is one reason we bought the stove we chose. No electronics. I'm not
impressed by all the fancy features that are controlled by circuit boards
when all I need is a hot flame. We bought a Bertazzoni

Similar Threads	Posted
MayTag Dishwasher Control Panel doesnt work	March 14, 2007, 3:17 pm
Any kits to retrofit a fawcet to electronic touch control?	January 16, 2010, 3:38 pm
Maytag digital oven control problem	December 20, 2005, 6:36 am
maytag Neptune control board repair	June 25, 2006, 10:31 am
Maytag dryer control knob removal	June 1, 2007, 8:07 am
HVAC Control Panel	August 8, 2005, 5:53 am
GE Range/Oven Control Replacement ERC3B	December 14, 2006, 10:41 pm
No power to burners or oven but control panel works	December 31, 2008, 12:06 pm
Maytag neptune washer motor control board resistor values needed badly, please!	February 17, 2006, 12:25 am
FA: Sharp R1491 Microwave Oven Control Panel (also fits R1491 & R1492)	February 2, 2007, 12:53 pm