Home Page link

Minor door repair advise needed..

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Minor door repair advise needed.. dchou4u@hotmail.com 08-31-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by dchou4u@hotmail.com on August 31, 2008, 12:00 pm


The door leading into the garage was slightly damaged yesterday when
the moves bumped a furniture against the edge of the door.. The damage
is about 2 inches in length. If I hire a handyman to fix this, what
needs to be done to restore the door?

I got some pictures of the damage here:
http://www.sopmedia.com/photos/IMG_0002.JPG
http://www.sopmedia.com/photos/IMG_0003.JPG
http://www.sopmedia.com/photos/IMG_0004.JPG

Thanks

PexSupply PEX Tools 468x60
Posted by RicodJour on August 31, 2008, 12:38 pm


wrote:
> The door leading into the garage was slightly damaged yesterday when
> the moves bumped a furniture against the edge of the door.. The damage
> is about 2 inches in length. If I hire a handyman to fix this, what
> needs to be done to restore the door?
>
> I got some pictures of the damage here:http://www.sopmedia.com/photos/IMG=
_0002.JPGhttp://www.sopmedia.com/photos/IMG_0003.JPGhttp://www.sopmedia.com=
/photos/IMG_0004.JPG

You can use Plastic Wood or Bondo to patch the divots, sand the patch
flush, then just touch-up paint it. It's no big deal, but a handyman
might charge you twenty to fifty bucks depending on where you are. I
think this is a perfect opportunity for you to save yourself some
money and learn how to make a simple repair.

R

Posted by willshak on August 31, 2008, 1:11 pm


on 8/31/2008 12:00 PM dchou4u@hotmail.com said the following:
> The door leading into the garage was slightly damaged yesterday when
> the moves bumped a furniture against the edge of the door.. The damage
> is about 2 inches in length. If I hire a handyman to fix this, what
> needs to be done to restore the door?
>

Paint.
> I got some pictures of the damage here:
> http://www.sopmedia.com/photos/IMG_0002.JPG
> http://www.sopmedia.com/photos/IMG_0003.JPG
> http://www.sopmedia.com/photos/IMG_0004.JPG
>
> Thanks
>


--

Bill
In Hamptonburgh, NY
in the original Orange County
To email, remove the double zeroes after @

Posted by Phisherman on August 31, 2008, 5:48 pm


On Sun, 31 Aug 2008 09:00:02 -0700 (PDT), "dchou4u@hotmail.com"

>The door leading into the garage was slightly damaged yesterday when
>the moves bumped a furniture against the edge of the door.. The damage
>is about 2 inches in length. If I hire a handyman to fix this, what
>needs to be done to restore the door?
>
>I got some pictures of the damage here:
>http://www.sopmedia.com/photos/IMG_0002.JPG
>http://www.sopmedia.com/photos/IMG_0003.JPG
>http://www.sopmedia.com/photos/IMG_0004.JPG
>
>Thanks


This damage does not affect the strength or operation of the door. You
could use a little Bondo, sand and paint. The biggest job might be
painting the door. Hiring a handyman to do this may cost more than
the cost of a new door.

Posted by SteveBell on August 31, 2008, 7:47 pm


dchou4u@hotmail.com wrote:

> The door leading into the garage was slightly damaged yesterday when
> the moves bumped a furniture against the edge of the door.. The damage
> is about 2 inches in length. If I hire a handyman to fix this, what
> needs to be done to restore the door?
>
> I got some pictures of the damage here:
> http://www.sopmedia.com/photos/IMG_0002.JPG
> http://www.sopmedia.com/photos/IMG_0003.JPG
> http://www.sopmedia.com/photos/IMG_0004.JPG

I do this type of repair all the time.
* Apply wood filler. Make sure it extends higher than the original
surface of the wood. I like Elmer's brand, because it's easy to work
and readily available.
* Let it dry overnight, or as long as the instructions say.
* Use fine sandpaper to sand the filler down to the original surface
level. Put in some grooves to match the existing fake wood grain if you
feel artsy-fartsy. :)
* Clean off all the dust.
* Paint it. You'll obviously get the best result if you paint the
whole door, but you can do a pretty good job if you thin out the paint
some and feather the edges.
* Put on another coat of paint if you can still see the filler through
the first coat.

This would only take me half an hour or so, but I would have to make
two trips to your house, so I would charge you for two hours ($80
total). I would, however, offer to fix other stuff to fill out the two
hours.

--
Steve Bell
New Life Home Improvement
Arlington, TX

Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Roof framing repair advise needed June 13, 2007, 11:23 pm
Outdoor telephone cable repair advise needed July 10, 2005, 6:57 pm
Wiring advise needed October 28, 2005, 9:31 pm
Plumbing advise needed June 17, 2005, 6:00 am
Cordless phones advise needed November 23, 2006, 11:51 am
plunger advise needed for a special toilet February 3, 2007, 12:13 pm
Best paint for steel garage door with minor rust August 24, 2005, 4:49 pm
Temporary roof repair after Wilma advise October 30, 2005, 11:46 am
Hot Tub Repair or Advice Needed December 9, 2007, 2:26 pm
ELECTRIC Oven Repair Info Needed March 28, 2006, 8:19 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap