|
Posted by John Grabowski on August 23, 2006, 3:42 pm
> hey everyone, i have a Lorex VCR , and a Lorex 16 security Camera input
> reciever, i have been having a consistent problem with this camera, one
> of the 6 cameras that i am using stops working as soons as it gets
> dark, now i have no idea about whats going on, but the problem has
> existed for a long time.
>
> I have the reviever set to where there is a full view of the security
> camera output for about 3 seconds, and then it goes on to the next one.
> what happens is when it gets to the 4th camera, you will only see the
> image of the camera before it, or sometimes you will see a very very
> dark image of what the output should look like.
>
> but please i need help with this camera, and if anyone has a solution,
> please forward some info
>
> email: badal.bhakta@gmail.com
>
Years ago I worked on a job where the security installer put in some cheap
security cameras. When it began to get cold out some of the cameras would
just transmit black. Eventually they installed heaters on the side of the
cameras and they worked fine after that. I was surprised at the improvement
because the heaters were nothing more than a small foil mat that connected
directly to the camera power supply and were attached to the side of each
camera.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap