Home Page link

Need cheap angle grinder for 1 job: 7" or 4.5"?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 3 of 3       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need cheap angle grinder for 1 job: 7" or 4.5"? Greg Guarino 05-10-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Stormin Mormon on May 13, 2007, 7:35 pm
HF has a recip saw that goes on sale now and again for about $20.
Should make it through one job. Only sawzall the posts off at the
bottom. Not the fence. The fence will bounce around a lot.

Same HF store should have bolt cutters for nipping the fence
wires.
--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
.

:
: Sounds like a good excuse to treat yourself to a Sawzall (or
other brand
: recipro).



Posted by Greg Guarino on May 15, 2007, 8:55 pm
On Sun, 13 May 2007 19:35:42 -0400, "Stormin Mormon"


>Same HF store should have bolt cutters for nipping the fence
>wires.

I already cut all the fence down. I started off with a sort of
mini-bolt-cutters, the size of linesman's pliers. They worked, but it
took more hand effort than I was ready to repeat a few hundred times.
I've got a Rotozip with the cutter wheel attachment. The metal cutting
wheel did an absolutely fabulous job. I'll bet it didn't take 40
seconds to make each vertical swath through the 4' high fence.

Greg Guarino

Page 3 of 3       << first < 1 2 3
Similar ThreadsPosted
Right Angle Grinder March 10, 2007, 11:58 pm
Angle grinder questions March 27, 2008, 3:27 am
Shopping for small angle grinder June 22, 2006, 9:57 am
Putting a cutter in my angle grinder? September 15, 2006, 3:40 pm
Partial follow-up on 4" angle grinder January 14, 2007, 10:17 am
Right Blade on Angle Grinder to Cut Stucco & Wire July 27, 2006, 8:25 pm
Cutting ceramic tile with an angle grinder? September 24, 2006, 5:35 pm
Wheel is loose on angle grinder shaft January 11, 2007, 9:02 pm
Recipricating saw or angle grinder to cut cement board? February 2, 2008, 11:09 pm
Bought a diamond angle grinder disk - what's it good for? November 26, 2005, 12:00 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap