|
Posted by on March 1, 2007, 11:59 am
>
> > We are selling our house and the family room has a cathedral ceiling
> > in it as well as a wood stove. The room looks a bit dingy and the
> > corners as well as some parts of the ceiling have dark areas from the
> > wood stove soot. As I don't have scaffolding, just a 6' step ladder
> > and a 24' extension, I want to do this with minimal effort. That
> > means one coat. I plan on using the best Benjamin Moore paint to get
> > good coverage. Should I attempt to wash off the soot before painting
> > or just paint over it? Is there a possibility of it bleeding
> > through? The soot is very faint, but if you stand back and look at
> > the whole room, it is apparent.
>
> > -Jim
>
> Can You use a brush extension on a vacuum? Just get more hose and a
> long 2x2 taped to the extension and walk around vacuuming..Most paints
> call for dust-free surfaces,,as well as oil and grease-free..It is
> tough to follow every specification for some products but each one
> ignored is a possible problem so follow as many as You can then pay
> Yer $ and take Yer chance..
> Soot will be very fine and try to clog the filter/bag so be
> prepared to change/clean it a time or two..Buy/borrow a shopvac for
> more power and a onetime pass,,the softer the brush extensions
> bristles are will mean less scratching of existing surface..
Vacuuming sounds like the way to go to me too.
|