|
Posted by on June 27, 2005, 9:34 pm
>From looking at a manual they have the terminals numbered 1,2, & 3. I
believee red is 1, white is 2, & black is 3, but anyways the back of
the push button should have the terminals marked w/ the same
colors/numbers. So whatever color wire is hooked to red on push button
hook to red on operator, same for the white terminal. The photo-cells
each have 2 wires, one is white & one is white w/ black stripe. Put the
white wires on the white terminal & the white/black wires on the black
terminal. When you are done there would be 1 wire on red, 3 wires on
white, & 2 wires on black. Hope that helps!
Doordoc
JeepIn wrote:
> My firned just bought a house that has a Sears Garage Door Opener, 1/4
> hp circa 1990, and the remote or door button doesn't work. THe former
> owner said they've "never worked". It has the two sensors at the door
> opening but only one lights. I programed a remote for it but it just
> makes the light blink, as if the garage door was suddenly stopped. It
> has three terminals on the back, Red, Black and White. The wiring looks
> a MESS and I think that's at least part of the problem. Is the wiring
> diagram for this avaialable online anywhere or can someone look in an
> owners manual for me and give me something to take a stab at? Thanks.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap