|
Posted by samurai on October 26, 2007, 10:32 am
>BTW a recipricating saw with a some metal cutting blades will make removing
>the oak floor easier. It barley needs any clearance to slip under the floor
>strips and cut the nails.
>
>
>> After careful consideration I have decided not to tile over my oak
>> floor and instead rip it out down to the subfloor, and would like to
>> install plywood and backer board for a new tile install. I have 3/4"
>> subfloor and can only go an additional 3/4" more due to height
>> problems. So here are my options to put over the 3/4" subfloor.
>>
>> a) 3/4" plywood
>> b) 1/2" plywood plus 1/4" backer
>> c) 1/4" plywood plus 1/2" backer
>>
>> Either choice would give me a combined floor of 1 1/2". So which would
>> be best?
>>
>
I would say B or C, as long as you are using the backerboard.
samruai
|