|
Posted by Noozer on February 4, 2007, 6:11 pm
>I need to replace a time-worn (and tennis ball through it) attic
> louver at one peak of my roof. The problem is that when I removed the
> remnants of the old one I was pretty sure it was 18x24 and picked up a
> cheap $10 plastic replacement.
>
> I got up there with the replacement and it wasn't even close. The raw
> opening is 17x22. What's worse is that opening is pretty much the
> limit. I'd have to do major reconstruction work to make it bigger (or
> smaller). There's aluminum siding on the house there that I'm not
> ready to replace and the wall joists on that wall are 18" apart.
>
> I don't see anything out there made for that size. What are my
> options? Right now there's a gaping hole there with screen on the
> inside to keep things out but once it gets warm here it'll be a real
> problem.
Call some siding companies from the yellow pages and see what you can come
up with.
|