Home Page link

Paint that dries in three seconds

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Paint that dries in three seconds HeyBub 11-08-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by jeffc on November 8, 2006, 9:45 pm



>>
>> Who said anything about a room? He said electronic gadgets and patio
>> furniture.
>
> I see the bigger picture. ;)
>
> Seriously, being able to dispense with the baking part of the powder
> coating process would be a big advantage, wouldn't it?

It's technology I'm not familiar with, but it sure seems that way to me.



Posted by bill allemann on November 8, 2006, 11:00 am


Most of these things sound great until you see the co$t.

bill

> jeffc wrote:
>>
>> > "[A company] has developed a family of "liquid solids" that are cured
>> > by
>> > exposure to ultraviolet light for a few seconds. Made up of nano-size
>> > particles (molecules measuring less than 1 billionth of a meter), the
>> > liquid solids ...could possibly eliminate a lot of the expense involved
>> > in
>> > applying protective coatings to electronic gadgets or patio furniture.
>> > It
>> > also doesn't give off hazardous fumes."
>>
>> Isn't that what powder coat does?
>
> How would you powder coat a room? Powder coated items need to be put
> in an oven to cure. UV light would be far simpler. UV light cured
> adhesives are what orthodontists use to bond brackets to teeth as speed
> is paramount. There would be a huge, instant market for such a
> coating.
>
> The issue would be the UV threshold. I wonder how intense the UV light
> would have to be to kick off the reaction.
>
> R
>



Posted by RicodJour on November 8, 2006, 11:27 am


bill allemann wrote:
> Most of these things sound great until you see the co$t.

Plywood's material cost was probably cost prohibitive until the
installation time and expense was factored in, which drew more people
to it, and which brought the plywood price down.

There's no reason to believe that an alternative painting process,
using a different curing method, would have a different economics
structure. Only time will tell.

R


Page 2 of 2       << first < 1 2
Similar ThreadsPosted
Refrigerator shut itself down in a few seconds January 12, 2007, 8:49 am
Gas smell without ignition for 10 seconds in oven December 16, 2005, 2:31 am
New ceiling fan -- worked about 10 seconds then stopped, help! June 10, 2006, 4:49 pm
Upright freezer compressor only works for 10 seconds. July 25, 2007, 11:06 pm
Air conditioner comes on for 10 seconds or so and kicks back off again, any ideas? August 30, 2007, 3:22 pm
"EARN MONEY FOR LIFE TIME,IT TAKES JUST 30 SECONDS" March 28, 2008, 8:20 pm
Motion light turns on for a few seconds after inside lights switched off August 14, 2008, 11:58 am
Can you mix primer/sealer and paint (exterior house paint)? March 6, 2006, 6:56 am
Peel-A-Way Paint Remover For Latex Paint: Any Good ? July 15, 2006, 7:36 pm
Lowes Paint Counter vs. A Real Paint Store September 5, 2007, 2:25 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap