Home Page link

Painting chimney siding

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Painting chimney siding jtravis432 08-11-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on August 11, 2007, 8:57 am
The portion of the chimney that sticks out above my roof is covered on
all four sides with wood siding - which needs repainting. What's the
best way for a homeowner to accomplish this task? I want to use a
roller so I need some kind of contraption to keep the roller pan level
on the roof. It's a one-story house and the roof line is just a little
over 8 ft above ground.

Thanks for any advice.


Electric Radiant Heat 468x60
Posted by Big_Jake on August 11, 2007, 9:27 am
On Aug 11, 7:57 am, jtravis...@yahoo.com wrote:
> The portion of the chimney that sticks out above my roof is covered on
> all four sides with wood siding - which needs repainting. What's the
> best way for a homeowner to accomplish this task? I want to use a
> roller so I need some kind of contraption to keep the roller pan level
> on the roof. It's a one-story house and the roof line is just a little
> over 8 ft above ground.
>
> Thanks for any advice.

Use a "mini" roller with a small plastic grid that goes inside of a 1
gallon paint can.

JK


Posted by willshak on August 11, 2007, 3:58 pm
on 8/11/2007 8:57 AM jtravis432@yahoo.com said the following:
> The portion of the chimney that sticks out above my roof is covered on
> all four sides with wood siding - which needs repainting. What's the
> best way for a homeowner to accomplish this task? I want to use a
> roller so I need some kind of contraption to keep the roller pan level
> on the roof. It's a one-story house and the roof line is just a little
> over 8 ft above ground.
>
> Thanks for any advice.
>
>

I just painted my 4 Seasons sunroom's roof ( story earlier in this
group). I used a 4" x 4" x 24" piece of post wood to set under the low
end of the roller pan to level it. The wood was positioned just inside
the rear legs of the pan. Lay the empty pan on the roof and measure how
much *you* would need to level it.

--

Bill
In Hamptonburgh, NY
To email, remove the double zeroes after @

Similar ThreadsPosted
Siding Rotting on Roof at Chimney September 25, 2005, 1:38 pm
siding vs painting March 2, 2006, 10:37 am
re-painting garage siding July 3, 2006, 11:00 am
Painting Of Siding Question July 19, 2007, 8:32 am
Painting Vinyl siding? August 2, 2007, 8:09 pm
Painting Vinyl Siding November 28, 2007, 12:36 pm
Painting old cedar plank siding? May 22, 2007, 9:14 pm
cedar siding painting/staining questions August 13, 2006, 2:54 pm
Brick Chimney Peak Fell Inside Chimney During Heavy Rain/ Lightning Storm June 25, 2006, 9:13 pm
Installing vynil siding over existing cedar plank siding. July 16, 2007, 6:10 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap