|
Home Repair - - If it ain't broken, don't fix it. Otherwise look here.
|
|
|
|
If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Turaco on July 18, 2006, 2:12 pm
I raised this problem in another section, but have a new angle that I
think needs to be addressed seperatly. The problem is that in thinking
I could get our painted fireplace back to its original brick, I could
use a paint stripper and all would be good. All is not good. It just
made a mess, and did get off some paint but not enough. The first try
was with a citrus based stripper. I tried again with a more industrial
type that burned through my gloves, but still didn't get off enough
paint. I am now just trying to get the brick to be clean and smooth
enough to repaint. The strippers left little chucks of paint all over
the brick, and spots where it will still peel off a bit. I tried hand
sanding some, which didnt help much. I am thinking of using a palm
sander on it, but I'm still not convinced this will work. I just want
to prime it and paint it, but if I do that now it will look rough and
will probably start to peel off eventually. I have been told that a
strong primer like "Gripper" should be good, and maybe if I use several
coats, this will help, and at this point I'll try just about anything.
Any suggestions would be much appreciated.
Thank you,
Turaco
|
|
Posted by m Ransley on July 18, 2006, 2:56 pm
Clean it as best you can , wash it and wait maybe a week for the
chemicals to air out. On interior brick with quality paint no primer is
realy needed, a Limestone -concrete color you can lighten with white to
get it to look like stone is Ben Moore Briarwood. I would not leave any
chunks, clean it well or all the crap will show through.
|
|
Posted by JD on July 18, 2006, 5:59 pm
Purchase yourself a nice stiff steel brush. Unless the finish on the
brick is extremely soft, which is doubtful around the fireplace, you
should be able to brush most of the loose materials away. Rinse well
and wait 5-7 days before painting.
If you are careful, purchase a steel brush attachment for your drill to
remove the remaining paint. I say be careful because if you are not you
could do more damage than good. Make slow progress until you get the
feel of it.
Just a thought, can't say as I've tried either of these suggestions.
JD
|
| Similar Threads | Posted | | Laying Laminate wood floor over rough surface brick | August 2, 2005, 12:42 pm |
| Laying Laminate wood floor over rough surface brick | August 2, 2005, 12:42 pm |
| Primer for new exterior stucco work. Use Cover Stain? | December 8, 2005, 5:41 pm |
| Painting rough estimate | November 28, 2006, 6:52 pm |
| Question about painting rough cedar clapboards | August 6, 2006, 11:09 am |
| Painting my paneling....how much primer? | July 17, 2006, 1:52 pm |
| Primer for painting exterior walls | October 4, 2006, 10:15 pm |
| Painting a purple table white - what kind of primer? | October 23, 2006, 8:18 pm |
| Painting an exterior plastic column -- Correct Primer to use? | January 18, 2008, 7:38 am |
| Painting Brick Home | May 20, 2006, 7:59 am |
|
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap