Home Page link

Patching Nail Holes In Floor

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Patching Nail Holes In Floor Zack V. 07-29-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Zack V. on July 29, 2006, 10:35 pm
Hi group,

I am ripping some old wall-to-wall carpeting to expose the hardwood floor
underneath. (The carpet is shot and I hear hardwood floors are in these
days.) The problem is the edges of the carpet are stapled to wooden slats
which are nailed down to the floor. The nails are easy enough to pull out.
The floor is in good shape and I don't plan to revarnish anytime soon. What
is best to use to fill in the nail holes?

TIA-ZV



AppliancePartsPros.com, Inc.
Posted by Alan on July 30, 2006, 2:13 am
I had a similar situation. Red Oak hardwood floors hiding under old
wall to wall carpet. I even had a corner of linoleum at the front
door. What I did was simply remove all the nail fragments, and
carefully scraped to remove glue under the lineoleum. Examine the
amount of cupping on the flooring. If its not too bad and the original
finish still there, I'd take a bucket of warm water with soap and clean
the floor. Don't pour water on the floor or otherwise soak the wood
though. Wipe off excess water as you go, and if necessary, dry with an
old towel. Ideally, the nail holes aren't all that bad, and you can
leave well enough alone until you refinish the entire floor.
Refinishing is a major job that will require careful research
concerning methods of sanding, filling of holes (such as your nail
holes and cracks between boards), securing of loose squeaky boards, and
choice of finish. Because our old finish wasn't really horrible, we
decided to put off refinishing for awhile. If the finish wears to the
wood, that's not all bad because when you refinish the flooring, you'll
be sanding down to the original wood anyway. Just put a throw rug over
really worn areas to keep the worst dirt from getting ground into the
grain. I hope this helps.

Zack V. wrote:
> Hi group,
>
> I am ripping some old wall-to-wall carpeting to expose the hardwood floor
> underneath. (The carpet is shot and I hear hardwood floors are in these
> days.) The problem is the edges of the carpet are stapled to wooden slats
> which are nailed down to the floor. The nails are easy enough to pull out.
> The floor is in good shape and I don't plan to revarnish anytime soon. What
> is best to use to fill in the nail holes?
>
> TIA-ZV


Posted by tbasc@bellsouth.net on July 30, 2006, 8:37 am
This is being done every day in my area and incresing the value of the
houses.
The slight scaring and staining from nails is considered charming.
TB

Alan wrote:
> I had a similar situation. Red Oak hardwood floors hiding under old
> wall to wall carpet. I even had a corner of linoleum at the front
> door. What I did was simply remove all the nail fragments, and
> carefully scraped to remove glue under the lineoleum. Examine the
> amount of cupping on the flooring. If its not too bad and the original
> finish still there, I'd take a bucket of warm water with soap and clean
> the floor. Don't pour water on the floor or otherwise soak the wood
> though. Wipe off excess water as you go, and if necessary, dry with an
> old towel. Ideally, the nail holes aren't all that bad, and you can
> leave well enough alone until you refinish the entire floor.
> Refinishing is a major job that will require careful research
> concerning methods of sanding, filling of holes (such as your nail
> holes and cracks between boards), securing of loose squeaky boards, and
> choice of finish. Because our old finish wasn't really horrible, we
> decided to put off refinishing for awhile. If the finish wears to the
> wood, that's not all bad because when you refinish the flooring, you'll
> be sanding down to the original wood anyway. Just put a throw rug over
> really worn areas to keep the worst dirt from getting ground into the
> grain. I hope this helps.
>
> Zack V. wrote:
> > Hi group,
> >
> > I am ripping some old wall-to-wall carpeting to expose the hardwood floor
> > underneath. (The carpet is shot and I hear hardwood floors are in these
> > days.) The problem is the edges of the carpet are stapled to wooden slats
> > which are nailed down to the floor. The nails are easy enough to pull out.
> > The floor is in good shape and I don't plan to revarnish anytime soon. What
> > is best to use to fill in the nail holes?
> >
> > TIA-ZV


Posted by Hopkins on July 30, 2006, 8:40 am

Zack V. wrote:
> Hi group,
>
> The nails are easy enough to pull out.
> The floor is in good shape and I don't plan to revarnish anytime soon. What
> is best to use to fill in the nail holes?

I use colored putty -- available at hardware or paint stores -- and I
typically end up with at least two different colors to match the grain
where the nail hole is. Sometimes you have to mix putties to get a
match.

You could try touch-up markers -- the color of the putty isn't as
vital, but you want to start with a light colored marker first. You can
always darken it, but starting too dark means you'll probably have to
dig out the putty and start again.


Posted by JimL on July 30, 2006, 2:11 pm

>Hi group,
>
>I am ripping some old wall-to-wall carpeting to expose the hardwood floor
>underneath. (The carpet is shot and I hear hardwood floors are in these
>days.) The problem is the edges of the carpet are stapled to wooden slats
>which are nailed down to the floor. The nails are easy enough to pull out.
>The floor is in good shape and I don't plan to revarnish anytime soon. What
>is best to use to fill in the nail holes?
>
>TIA-ZV
>

Wood putty.



Similar ThreadsPosted
Nail holes on hardwood floor May 18, 2008, 9:02 pm
patching holes December 2, 2006, 10:54 pm
Patching Holes in Stucco June 12, 2006, 1:23 pm
Install VCT over old concrete--what to use for patching holes? February 28, 2006, 9:31 am
Patching holes in Western Red Cedar Siding June 29, 2007, 1:30 pm
Putty over nail head holes? July 24, 2005, 8:50 pm
Exterior filler for nail holes September 8, 2008, 8:36 am
Filling nail holes on painted project March 16, 2006, 8:27 am
What to use to cover nail heads and fill holes? August 23, 2007, 1:44 pm
Ashphalt Shingle roof leaks at the nail holes. August 8, 2006, 9:42 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap