|
Posted by mm on April 10, 2007, 11:01 pm
>I just bought this fixture and ran into a snag installing it. It was
>made in China and purchased in Lowes. Manual limited and no support
>available, unless I want to call the china office.Here is the
>problem...I installed the mounting strip which has a threaded nipple.
>The manual does not actually show the 2 wires coming through this
>nipple to meet up with the 2 wires of the fixture. If its not meant to
>be installed that way, why the hollow nipple? In between I have to
Xiang foi meh soon.
>attached those wires with wingnuts and then with a canopy in place,
>I'm suppose to screw collar loop to hold the canopy to the ceiling.
>Now in order to do that, that collar loop has to be threaded to that
>nipple...how is it possible to do so, with wires coming out of that
>nipple, or am I to assume that that nipple is only for holding up the
>canopy and the wires should just be attached and ly on the inner
>surface of that canopy?
Wot gou meh nah foon.
> I could send a picture if someone requests it
>of the manual and of a picture took. I don't know if one can include
>pictures in this forum...its been awhile since I've been here. Thanks
Nigh xi picturesan.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap