|
Posted by Red Green on April 30, 2008, 7:34 pm
> As a reminder, plumbing is not my strongpoint but I do it pretty much
> without leaks pretty much first shot lately.
>
> Anyway, Under a sink, black (ABS?) to white (PVC) seems to be a no-no.
> From what I take, it's the gluing that is the issue. Actually I hear
> Oatey makes an acceptable glue now. Local codes often don't accept
> this I also hear.
>
> My Q is not about gluing though. It at the slip joints. Since there is
> no glue involved, does general code allow this? And again, of course
> local code prevails.
>
Happened to have a chance to call the inspector here. He says A-OK on ABS
to PVC at slip joints long as it's not a glue joint.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap