Home Page link

Priming Flashing

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Priming Flashing BillGill 05-30-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by ransley on May 30, 2008, 3:06 pm
> ransley wrote:
> >> I just had my roof replaced. =A0There is one place where the new flashi=
ng is
> >> up against the wood siding. =A0I need to paint it white to match the re=
st of the
> >> house. =A0What is the best primer for the flashing?
>
> >> Bill
>
> > What, copper, galvanised, aluminum, rust oleum oil will not work best
> > on galvanised.
>
> It is supposed to be galvanized. =A0I don't expect they would have changed=
.
>
> Bill

Are you sure it not aluminum

PexSupply Save 10 468x60
Posted by Jim Elbrecht on May 30, 2008, 2:59 pm
On Fri, 30 May 2008 10:58:39 -0700 (PDT), ransley

>> I just had my roof replaced.  There is one place where the new flashing is
>> up against the wood siding.  I need to paint it white to match the rest of the
>> house.  What is the best primer for the flashing?
>>
>> Bill
>
>What, copper, galvanised, aluminum, rust oleum oil will not work best
>on galvanised.

They call it Tremclad- but it is a Rustoleum product;
http://rustoleum.com/product.asp?frm_product_id=545&SBL=5
"Specially formulated to provide adhesion when topcoating galvanized
metal "

Point made, though, is 'use the right primer.'

Jim

Page 2 of 2       << first < 1 2
Similar ThreadsPosted
? priming drywall March 2, 2006, 1:44 am
Priming my New Drywall April 2, 2007, 10:38 am
Priming and Painting October 14, 2007, 11:15 am
Drywall priming - Oil or Latex August 1, 2005, 11:06 am
Priming cedar trim May 15, 2006, 1:24 pm
House painting\priming July 9, 2006, 8:29 am
Priming MDF surfaces ( not cut edges ) May 13, 2007, 10:50 pm
Exterior door cutout need priming July 18, 2006, 8:42 pm
How much time can elapse to top coat after priming? March 7, 2007, 9:46 am
Weedeater problem: priming bulb May 5, 2007, 3:19 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap