|
Posted by willshak on July 3, 2006, 2:55 pm
larry barrios wrote:
> willshak sent this message::
>
>> badgolferman wrote:
>>
>>> larry barrios, 7/3/2006, 2:04:39 PM,
>>>
>>>
>>>
>>>> Hello,
>>>>
>>>> We are installing tile in the entry way and engineered wood floor in
>>>> the adjacent room and hallways. We would prefer not to use
>>>> transition and butt the wood floor against the tile. Is this
>>>> recommended? If so, can I lay down the wood right up against the
>>>> tile or should I leave a gap and fill with grout or other material?
>>>>
>>>> tia,
>>>> -larry
>>>>
>>>
>>>
>>> Your wood floor will need to expand and contract. That is why
>>> transition pieces are used.
>>>
>>
>> And for aesthetics, the transition molding makes a nice frame for the
>> tile.
>
> So is there no way around this? Is it not a good idea to leave an
> expansion just on the other end? We were going to float the floor.
> If we nailed down the floor, won't that keep the floor from
> expanding? We live in California, a friend told me that he's never
> noticed his wood floor expand/contract.
You can do whatever you want, it's your house.
Northern California or Southern California? The name of the state does
not matter, on the east coast, that would be from New York to South
Carolina.
Here in NY, I put down a floating floor in a sunroom. It looked great
after I put it down in the Fall. Next Summer, I noticed that there were
ripples in the flooring near the outside wall. It turns out that I had
cheated and didn't allow the full 1/4" spacing at the ouside walls that
they recommended. Fortunately, I was able to remove the moulding and cut
some of the planking on the outside wall.
--
Bill
In Hamptonburgh, NY
To Email, remove the double zeroes after 'at'
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap