Re: Carpentry - Molding Joints

	Re: Carpentry - Molding Joints

Home Repair - - If it ain't broken, don't fix it. Otherwise look here.

Bookmark this page: YahooMyWeb

Subject

Author

Date

JimL

06-28-2005

Doug Kanter

If you were Registered and logged in, you could reply and use other advanced thread options

Posted by JimL on June 28, 2005, 10:54 am

> I need some suggestions on how to join crown molding and door molding

>and floor molding.

> I don't own a fancy tool that will cut biscuits or any such thing.

>But when I join sections, I'd like the joint to disappear when

>painted.

I guess a 45 cut on the mitre saw and then elmers wood glue after
eyeballing , eh?

Posted by Doug Kanter on June 28, 2005, 11:06 am

>> I need some suggestions on how to join crown molding and door molding

>>and floor molding.

>> I don't own a fancy tool that will cut biscuits or any such thing.

>>But when I join sections, I'd like the joint to disappear when

>>painted.

> I guess a 45 cut on the mitre saw and then elmers wood glue after

> eyeballing , eh?

....and don't do what I did, when I first tried cutting toe molding. I won't
even go into it. Way too embarrassing.

Similar Threads	Posted
Re: Carpentry - Molding Joints	June 28, 2005, 10:00 am
Carpentry - Molding Joints	June 28, 2005, 6:24 am
Carpentry Need Help.	February 19, 2006, 8:50 pm
carpentry question	June 23, 2007, 12:32 pm
Stupid question? (carpentry)	April 23, 2007, 11:50 am
How to get minor carpentry repairs done to my house?	September 18, 2006, 12:51 pm
Carpentry Question: Roof over deck (aka porch).	September 12, 2005, 11:44 am
Slightly off-topic: Learning carpentry and basic wood-work ...	December 24, 2007, 1:51 pm
How to cut control joints	June 29, 2006, 12:48 am
Can you unweld pvc joints?	May 29, 2007, 1:32 am