Home Page link

Re: Dip tube question

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Dip tube question Roger Shoaf 03-29-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Roger Shoaf on March 29, 2007, 7:50 pm



> I suspect the dip tube in my water heater has failed. Is it practical to
> replace the tube? After years in various houses this is the first time
this
> has happened.
> The tank in question is eight years old. Repair or replace? I don't know
the
> make off hand. The tank is in an inconvenient place.
>

It is always incontinent to get to the dip tube, but it is very possible and
a DIY job.

While you are at it, check your anode.

Instructions are here: http://waterheaterrescue.com/


--
Roger Shoaf
If you are not part of the solution, you are not dissolved in the solvent.



AppliancePartsPros.com, Inc.
Posted by hallerb@aol.com on March 29, 2007, 7:55 pm


>
>
> > I suspect the dip tube in my water heater has failed. Is it practical to
> > replace the tube? After years in various houses this is the first time
> this
> > has happened.
> > The tank in question is eight years old. Repair or replace? I don't know
> the
> > make off hand. The tank is in an inconvenient place.
>
> It is always incontinent to get to the dip tube, but it is very possible and
> a DIY job.
>
> While you are at it, check your anode.
>
> Instructions are here:http://waterheaterrescue.com/
>
> --
> Roger Shoaf
> If you are not part of the solution, you are not dissolved in the solvent.

on a 8 year old tank its not worth the hassle.

say 400 bucks for a new tank vs a all day hassle where its likely you
will still need a new tank when your done.

crud builds up in tanks, new tanks better energy efficency too


Posted by Roger Shoaf on March 29, 2007, 10:52 pm



> > While you are at it, check your anode.
> >
> > Instructions are here: http://waterheaterrescue.com/
> >
> > --
> > Roger Shoaf
> > If you are not part of the solution, you are not dissolved in the
solvent.
>
> on a 8 year old tank its not worth the hassle.
>
> say 400 bucks for a new tank vs a all day hassle where its likely you
> will still need a new tank when your done.
>
> crud builds up in tanks, new tanks better energy efficency too
>

I guess that depends a lot on water chemistry. I have several water heaters
in my rental units that are pushing 25 years of age and when I have checked
the anodes they are fine. These are nothing special, they are the cheap 30
gallon models.

Seems to me that tossing a water heater that only needs a dip tube and still
has an anode suggests that the tank is probably OK. If on the other hand
when the anode is pulled there is nothing left of the sacrificial material
then the tank is probably well on its way out.

I don't know what you do for a living, but even if it took you all day to
disconnect three connections drain the tank, drag the sucker into the back
yard and pulled the anode, if I found at that point that all I needed was a
new dip tube I would be perfectly happy leaving that $370 in my checking
account as a reasonable wage for my effort.

If I found upon inspection that I needed to replace the thing at that point,
all I am out is the time it took to inspect the old one.

--

Roger Shoaf

About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.



Posted by hallerb@aol.com on March 29, 2007, 11:20 pm


>
>
>
>
>
>
> > > While you are at it, check your anode.
>
> > > Instructions are here:http://waterheaterrescue.com/
>
> > > --
> > > Roger Shoaf
> > > If you are not part of the solution, you are not dissolved in the
> solvent.
>
> > on a 8 year old tank its not worth the hassle.
>
> > say 400 bucks for a new tank vs a all day hassle where its likely you
> > will still need a new tank when your done.
>
> > crud builds up in tanks, new tanks better energy efficency too
>
> I guess that depends a lot on water chemistry. =A0I have several water he=
aters
> in my rental units that are pushing 25 years of age and when I have check=
ed
> the anodes they are fine. =A0These are nothing special, they are the chea=
p 30
> gallon models.
>
> Seems to me that tossing a water heater that only needs a dip tube and st=
ill
> has an anode suggests that the tank is probably OK. =A0If on the other ha=
nd
> when the anode is pulled there is nothing left of the sacrificial material
> then the tank is probably well on its way out.
>
> I don't know what you do for a living, but even if it took you all day to
> disconnect three connections drain the tank, drag the sucker into the back
> yard and pulled the anode, if I found at that point that all I needed was=
a
> new dip tube I would be perfectly happy leaving that $370 in my checking
> account as a reasonable wage for my effort.
>
> If I found upon inspection that I needed to replace the thing at that poi=
nt,
> all I am out is the time it took to inspect the old one.
>
> --
>
> Roger Shoaf
>
> About the time I had mastered getting the toothpaste back in the tube, th=
en
> they come up with this striped stuff.- Hide quoted text -
>
> - Show quoted text -

my opinion is based on the fact that most tanks here last 8 to 10
years tops. so his 8 year tank here is already has one foot on banana
peel the other in grave, really old tanks like yours may well last
longer than ones produced in the last 15 years or so, and here a new
nice tank from home depot is 350 bucks, my best friend bought a sears
close out 40 gallons NG for 270 bucks last year when sears closed the
repair stores nationwide.

So its way less than 800 bucks, DIY, if he is willing to replace the
dip tube then installing a new tank is easy.

The OP doesnt say why he believes the dip tube is bad, one guess is
poor quantity of hot water, which mght be a dip tube, but may also be
corrosion built up in the tank. manufacturs largely fixed the dip tube
troubles years ago.

the economics of tank replacement. assume DIY 400 bucks or pro install
800 bucks, 10 year average tank life, cost per year 40 or 80 bucks,
less than a nice candy bar a week.


Posted by Rick Blaine on March 30, 2007, 9:38 am

> After the last one had me going, I can't wait to see how this one
> transpires..
> Searcher
>
The last one In retrospect dumping the salt OUT OF the bags into wheel
barrow ( clean) spreading around the pool with shovel might of been a better
idea, to bad I didn't think of that.



Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Re: Dip tube question March 30, 2007, 8:05 am
Re: Dip tube question March 30, 2007, 12:48 am
Re: Dip tube question March 30, 2007, 6:05 pm
Re: Dip tube question March 30, 2007, 10:27 pm
Re: Dip tube question April 2, 2007, 5:56 am
36 inch Samsung TSF-3579 tube TV - Size and Weight of Picture Tube November 7, 2006, 1:53 pm
wiring question Knob and Tube March 5, 2007, 9:28 am
Question on Japanese tutorials on You Tube June 6, 2008, 5:52 pm
Gas Range repair question (DIY) - tube manifold supply December 2, 2006, 11:55 am
OLD TV REPAIR TOOLS-permapower huebrite picture tube brightener- 6-page tv set service tips tube replacement book-sylvania techs handheld color viewer tool-vintage repair shop cleanout-$10 December 19, 2007, 8:14 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap