|
Posted by DanG on April 4, 2007, 10:15 pm
These bits a bit expensive, but will give excellent results:
<http://www.milwaukeeconnect.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=27&catalogId=40028&langId=-1&mainCategoryId=192327&fromSearch=Y&productId=683420>
They are very fast and aggressive, but do require a very healthy
drill to turn them. Sure beats the daylights out of small drill
and chisel that has been mentioned. It could also be done with a
hole saw, and chipping out the "slug" repeatedly, but it will
require some creativity to extend the bit so deep in the hole.
Both type of drills would work best to drill from each side to
hopefully meet in the center. The Selfeed bit has a lead screw
which would not function well if predrilled a lead hole. The hole
saw has 1/4" pilot bit and would be happy to work with a 1/4 lead
hole.
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
dgriff237@7cox.net
> I'm about ready to go down to the market with an AK-47 and
> attack the canned meat department I'm so sick of spam in my
> mailbox.
>
> What does a person get to help lessen this aggravation? I'm
> computer savvy, but don't want anything that is going to take a
> lot of time every day. I also don't want to set it up so that I
> ONLY get messages from people I list, as that would make it as
> difficult.
>
> I've heard of Agent, and perhaps it's time to spend the time I
> need to learn this program.
>
> But, instead, is there a downloadable (free) program that works
> good, or a good (cheap) program.
>
> It's gotten so bad, I've almost quit eating fried SPAM
> sandwiches. (mustard only, of course)
>
> Steve
>
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap