Home Page link

Re: Weedwhacker string problems

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Weedwhacker string problems Pete C. 07-03-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Pete C. on July 3, 2008, 3:34 pm

letterman@invalid.com wrote:
>
> I bought a new electric weedwhacker last fall on a closeout sale. I
> finally used it today, and it started out working well, but then the
> string kept breaking off INSIDE the string holder (whatever that is
> called). Anyhow, I have to keep taking off that cover over the string
> and pulling out more string. After that, I whack for a minute or less
> and the string breaks again. I am spending more time fixing the
> string than whacking weeds. (This is the original factory string, and
> was would at the factory, so it should be the right string and wound
> properly on the spool).
>
> One thing I noticed is that the string is sticking to itself inside
> the spool. It's like it slightly melted together in spots. It pulls
> apart easily, but it seems to me that this is not right, and is likely
> what is causing the problem. Once again, this is FROM THE FACTORY, so
> I it should be installed properly......
>
> Since I bought it last fall, I doubt there is any warranty coverage,
> or if there is, I'll have to drive 50 miles to get it taken care of,
> which I am not willing to do at todays gas prices. I'm sure there is
> something I can do myself, but what?????
> Maybe I should just replace the string???
> I was wondering if it would help to spray some WD40 or other lubricant
> on the string... ?? ? ? ????
>
> Thanks for all advice
>
> Spammers will be shot with my caulking, nail, soldering, or staple gun
> (your choice) !

Probably low grade line. Pickup a spool of quality profiled (hex,
spline, etc.) nylon trimmer line and load it carefully. The profiled
line cuts better due to the sharper edges, and the line is generally
better quality as well. Even with quality line it can be a pain to load
properly. There are a lot of different trimmer head designs out there
and some work better than others. On the gas powered units it is usually
possible to change to a different style head. On electric ones you're
usually stuck with what it came with.

Similar ThreadsPosted
Re: Weedwhacker string problems July 3, 2008, 2:26 pm
Re: Weedwhacker string problems July 3, 2008, 3:16 pm
Re: Weedwhacker string problems July 3, 2008, 11:11 pm
Re: Weedwhacker string problems July 5, 2008, 2:37 am
Re: Weedwhacker string problems July 5, 2008, 9:35 am
Re: Weedwhacker string problems July 5, 2008, 2:27 pm
String Trimmer - String Replacement Device November 30, 2005, 7:30 am
? Jam-Proof String Trimmer? July 9, 2005, 2:08 pm
Worx GT String Trimmer April 29, 2007, 11:49 pm
Who's in love with their string trimmer? May 5, 2008, 3:29 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap