|
Posted by Dean on January 10, 2007, 8:26 pm
Alan
Alpha water systems INC. had this in their faq..Aside from their
obvious advertising maybe there's info You can adapt to Your
system..Maybe You can combine types of resin or use more than one
softener in series..I would think Your softeners' Manufacturer could
tell You what is safe..
Dean
"Will a softener remove iron/red stains?"
In many cases it will! It depends upon the levels of Iron present. We
manufacture Iron units for heavy Iron problems. Please contact us for
correct Iron-Softener combinations for maximum life.973-293-7856
"Will a softener remove tannin?"
It can. By replacing the typical CATION media in the softener tank with
an ANION resin, it will remove tannin. Use Model FGA-60T.
"Will a softener remove nitrates?"
It can. By replacing the typical CATION media in the softener tank with
a special nitrate resin, it will remove nitrates. Use Model FGA-60N.
"Will a softener remove radium?"
It can. By replacing the typical CATION media in the softener tank with
a special radium resin, it will remove radium. Use Model FGA-120MJR.
Alan wrote:
> Hi,
>
> Hoping someone out there has some additional ideas.
>
> We are on a well. The whole area I live in is known to have bad water.
> In ours we have a tripple whammy of hard water, iron and tannin.
>
> We right now have a 3 stage treatment process. First is an multimedia
> filter (green sand) to remove the iron, then a water softner and
> finally a tannin removal filter and after that a big blue cartridge
> filter and a UV filter.
>
> However, lately they just are not keeping up on the tannin side. Our
> water is still a yellow/brown color and occasionally has an odor to it.
>
> We have replaced the media in the iron filter and that helped a bit.
> Right now I am using a product called Res-Up to help remove the iron
> build up in the water softner and soda ash to help remove it from the
> tannin filter, but it really is not helping.
>
> I understand water with both iron and tannin is doubley tough to
> process.
>
> Are there other solutions I should be looking at? Is chlorination an
> option? Anything else?
>
> Any suggestions are appreciated.
>
> Alan
|