Removal of old ceramic tile

Posted by on January 16, 2006, 7:44 pm

We want to remove about 200 square feet of old ceramic tile in our
kitchen...its been down for about 6 years and we want to replace it with
a different tile. Can I just chisel and scrape each tile off? What about
using a power scraper tool that I could rent? The tile place wants $300
to remove it and cart it away. Any tips that would help me to do it
myself would be appeciated.

Doug and Patty

Posted by thetiler on January 16, 2006, 8:41 pm

$300 is very fair to do this very hard work.
You're nuts not to pay to do it. Breaking out
old tile with my chisel-hammer and carting it
away is the hardest part of tiling, you should
let them do it.
Besides, if you have a 200 sq.ft. kitchen you
can't be that needy to do it yourself That's
a big kitchen. You must be rich! :-)

There is a skill and talent involved in not damaging
walls, baseboard, doors, cabinets etc. You'd have
$100 into renting a tool, and carting the tile away,
and you'd risk costly damage you may cause,
not being familiar with the tool. Also, the worst
times I've ever gouged myself were times I was
taking out tile. Much of the time the tile breaks,
it shears, leaving an edge like a razor blade.

Spend $200 more and sit back sipping tea
and watch the tileguy kill himself.

thetiler

Posted by Charlie on January 16, 2006, 10:41 pm

> $300 is very fair to do this very hard work.
> You're nuts not to pay to do it. Breaking out
> old tile with my chisel-hammer and carting it
> away is the hardest part of tiling, you should
> let them do it.
> Besides, if you have a 200 sq.ft. kitchen you
> can't be that needy to do it yourself That's
> a big kitchen. You must be rich! :-)
> There is a skill and talent involved in not damaging
> walls, baseboard, doors, cabinets etc. You'd have
> $100 into renting a tool, and carting the tile away,
> and you'd risk costly damage you may cause,
> not being familiar with the tool. Also, the worst
> times I've ever gouged myself were times I was
> taking out tile. Much of the time the tile breaks,
> it shears, leaving an edge like a razor blade.
> Spend $200 more and sit back sipping tea
> and watch the tileguy kill himself.
> thetiler

Ditto, I'm with you. Had ours done a couple of months ago and sure glad I
didn't try it myself.
The tea will come in handy to wash the dust down if you stick around to
watch.

Posted by SQLit on January 16, 2006, 11:55 pm

> We want to remove about 200 square feet of old ceramic tile in our
> kitchen...its been down for about 6 years and we want to replace it with
> a different tile. Can I just chisel and scrape each tile off? What about
> using a power scraper tool that I could rent? The tile place wants $300
> to remove it and cart it away. Any tips that would help me to do it
> myself would be appeciated.
> Doug and Patty

A wide point chisel is best 3-4 inches.

I just spent $120 on a 4 inch wide spade bit for my Hilti TE-52. I am
removing more than 200 feet.

It is not hard but very labor intensive.

Hate to tell you this but if the floor was done correctly it will come up in
small pieces. Your not going to be scraping any tile. A sledge hammer
works to get started.

The question is really, what is the 300 worth to you and yours? You will
spend most if not all of the weekend doing this. Make sure you cover
everything of value. The chips will fly everywhere.

Similar Threads	Posted
Removal of Tile Perfect Ceramic Tile Adhesive & Grout	January 27, 2008, 8:33 am
Ceramic Tile Removal SOS!!!	September 7, 2007, 8:57 am
Ceramic tile/plywood removal	January 4, 2007, 10:24 pm
Removal of Ceramic Tile and Reuse	March 13, 2008, 10:23 am
remove ceramic floor tile replace with new tile	March 22, 2006, 11:29 am
ceramic tile on ceiling - I don't want tile there anymore!	November 25, 2006, 6:32 pm
Ceramic tile vs. Slate tile	November 29, 2005, 3:28 am
ceramic tile	June 15, 2007, 8:30 pm
ceramic tile	October 22, 2009, 3:02 pm
sources for ceramic tile?	August 5, 2005, 4:44 pm