If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by msparrer on November 29, 2005, 10:38 am
I am replacing the motor in my dryer and I'm not sure where to start.
Anyone out there that can lend a hand?
Thanks!!
|
|
Posted by Duane Bozarth on November 29, 2005, 10:42 am
msparrer wrote:
show/hide quoted text
>
> I am replacing the motor in my dryer and I'm not sure where to start.
Unplug it?
show/hide quoted text
> Anyone out there that can lend a hand?
Where are you?
Can't imagine it could be anything more than taking the old one out and
putting in a new one.
|
|
Posted by msparrer on November 29, 2005, 10:48 am
I'm in Virginia and I'm thinking that there is probably a little more
to it than unplugging it :-)
|
|
Posted by BobK207 on November 29, 2005, 11:34 am
check out
http://www.repairclinic.com/ hvave your model number & serial number available
I have found this website to be very useful for parts & info, I've
bought dozens of aplliance parts, they all have been the correct part,
came in a few days. They a very efffective "part finder" system if you
don't have the exact P/N.
I've been a DIY for over 40 years (replaced my first dryer heater
element when I was 11)
If you are at all mechanically inclined & have a reasonable set of
tools, a DIY dryer motor will be a snap. If the dryer location is
"close quarters" that will be the most trouble.
Dryers are pretty simple beasts.
last dryer repair I did, I got a generalized repair manual just as
"insurance" ~$15
here's an example
p/n 753981
Dryer repair manual for
Whirlpool - Sears - Kenmore - Kitchen Aid - Roper -
Estate large capacity dryers. Gas or electric. Revision H (copyright
1998)
cheers
Bob
|
|
Posted by Duane Bozarth on November 29, 2005, 11:39 am
msparrer wrote:
show/hide quoted text
>
> I'm in Virginia and I'm thinking that there is probably a little more
> to it than unplugging it :-)
You asked what to do _first_ :)
|
Page 1 of 2 1 2 > last >>
| Similar Threads | Posted | | Centrifugal switch on Kenmore dryer motor | July 2, 2007, 1:37 pm |
| Replacing A Drum Support Roller On Kenmore Electric Dryer ? | May 12, 2006, 7:45 am |
| adivce on how to replace a SUMP & MOTOR ASSEMBLY on a kenmore dishwasher | January 29, 2006, 2:36 pm |
| My details on "no spin" Kenmore or Whirlpool "Motor Coupling" upgrades, and washer repair. | December 29, 2006, 3:39 pm |
| Kenmore Canister vacuum cleaner: Bypassing the diode when connecting wire to the motor | July 6, 2008, 10:21 am |
| Replacing well pump motor | June 30, 2005, 6:28 pm |
| Kenmore Dryer Problem | September 7, 2005, 6:49 am |
| Kenmore Dryer problems | September 12, 2005, 7:41 am |
| Noisy Kenmore Dryer | November 30, 2005, 11:32 pm |
| Kenmore dryer 70 series | September 17, 2007, 1:32 pm |
|
|
> I am replacing the motor in my dryer and I'm not sure where to start.